Steves_TR6 Posted July 31, 2021 Author Report Share Posted July 31, 2021 4 hours ago, stuart said: The wiring is different between models Steve, TR4 only had single speed, TR4a has 2 speed and different wiring. TR5 has 2 speed with wiring similar to a 4a. TR6 has 2 speed and different wiring again. Stuart. Haha , that had to be the case didnt it! Quote Link to post Share on other sites
JohnC Posted August 1, 2021 Report Share Posted August 1, 2021 On 7/31/2021 at 4:44 PM, Steves_TR6 said: i’ll try to get to this in the next week.... Don't burst a blood vessel over it! We're in lockdown here and I can't see anything changing for a couple of months... Quote Link to post Share on other sites
Steves_TR6 Posted August 12, 2021 Author Report Share Posted August 12, 2021 Life keeps getting in the way of this project.... but today i have ordered the relays ready for a very limited production run next week ! The supplier only had Four left in stock..... so please only buy to use and not for future projects, i’ll make more if there is demand. i’m envisaging a cost of parts and postage of about £20, so £25 posted to the UK will likely be the asking price unless something changes on the parts front. i think i’ll supply them with a mini loom attached and bare wire ends so they can be integrated to a variety of cars i’ll also include a printed set of instructions, which will be based on the CR TR6 but should translate readily to older cars. please confirm your orders for this desireable, limited edition! , item :-) Steve Quote Link to post Share on other sites
John Morrison Posted August 12, 2021 Report Share Posted August 12, 2021 I've got a TR4 single speed. If it works on mine, count me in. John Quote Link to post Share on other sites
Steves_TR6 Posted August 12, 2021 Author Report Share Posted August 12, 2021 43 minutes ago, John Morrison said: I've got a TR4 single speed. If it works on mine, count me in. John It will work on a single speed John, but you will need to add a switch to turn on the intermittent wipe function OR it will replace the single speed which wouldnt be ideal. steve Quote Link to post Share on other sites
John Morrison Posted August 12, 2021 Report Share Posted August 12, 2021 No problem Steve, put me on the list, and many thanks. You also have a PM. John. Quote Link to post Share on other sites
cvtrian Posted August 12, 2021 Report Share Posted August 12, 2021 3 hours ago, Steves_TR6 said: please confirm your orders for this desireable, limited edition! , item :-) Steve PLease count me in - TR6 version Thanks Ian Quote Link to post Share on other sites
Steves_TR6 Posted August 12, 2021 Author Report Share Posted August 12, 2021 So the first batch is sold out ..... :-) Chris, John and Ian ordered today, and Harry has been patiently waiting for ages! relays are on order and once they come in i’ll have a session in the workshop, and write some instructions. these should work for any TR as long as it’s wipers require a positive feed to start the wipe, with the self park completing the process. watch out for updates ! Steve Quote Link to post Share on other sites
dblenk Posted August 12, 2021 Report Share Posted August 12, 2021 Steve good one for the future for me david Quote Link to post Share on other sites
Richard Pope Posted August 12, 2021 Report Share Posted August 12, 2021 On 2/18/2021 at 6:22 PM, Steves_TR6 said: Yes, i’ll certainly do that once it’s tested Richard I'm in no rush but is this still possible, Steve? Quote Link to post Share on other sites
Steves_TR6 Posted August 12, 2021 Author Report Share Posted August 12, 2021 9 minutes ago, Richard Pope said: I'm in no rush but is this still possible, Steve? Absolutely. once i have reminded myself how it works .... i’ll document that in the ‘installation instructions’ ..... and youare welcome to a copy Richard steve Quote Link to post Share on other sites
Alfrom Posted August 12, 2021 Report Share Posted August 12, 2021 yes please Steve just to confirm my earlier request. CR TR6. Pierre Quote Link to post Share on other sites
harrytr5 Posted August 13, 2021 Report Share Posted August 13, 2021 Just read this yes please Steve. Pay by PayPal , bank transfer, carrier pigeon ? Regards Harry TR5 Nutter P.S. will be in the pride of owner hall Malvern Quote Link to post Share on other sites
JohnC Posted August 13, 2021 Report Share Posted August 13, 2021 @Steves_TR6 I'd really appreciate the wiring diagram/ parts list if you're willing to share. I promise not to set up in competition Quote Link to post Share on other sites
Lebro Posted August 13, 2021 Report Share Posted August 13, 2021 Ditto ! Bob. Quote Link to post Share on other sites
DRD Posted August 13, 2021 Report Share Posted August 13, 2021 On 8/12/2021 at 8:17 AM, Steves_TR6 said: Life keeps getting in the way of this project.... but today i have ordered the relays ready for a very limited production run next week ! The supplier only had Four left in stock..... so please only buy to use and not for future projects, i’ll make more if there is demand. i’m envisaging a cost of parts and postage of about £20, so £25 posted to the UK will likely be the asking price unless something changes on the parts front. i think i’ll supply them with a mini loom attached and bare wire ends so they can be integrated to a variety of cars i’ll also include a printed set of instructions, which will be based on the CR TR6 but should translate readily to older cars. please confirm your orders for this desireable, limited edition! , item :-) Steve Hi Steve, I'll have one if you make any more. Cheers Darren Quote Link to post Share on other sites
AlanG Posted August 13, 2021 Report Share Posted August 13, 2021 Me to please Steve. For TR4A. Alan. Quote Link to post Share on other sites
joestr6 Posted August 13, 2021 Report Share Posted August 13, 2021 Would love to be included in the next batch please. More than happy to pay the asking price. Joe Quote Link to post Share on other sites
AndrewMAshton Posted August 14, 2021 Report Share Posted August 14, 2021 Hello Steve, another for parts list and wiring diagram, it is for a 4A with single speed motor, am I correct in thinking I could replace my pull switch with an off/on/mom toggle switch?, cheers, Andrew Quote Link to post Share on other sites
Ali King Posted August 15, 2021 Report Share Posted August 15, 2021 Hi Steve, sounds like a great job - I really appreciate your efforts on this. Please count me in for one for my 4A when you plan your next batch. Cheers, Ali. Quote Link to post Share on other sites
Steves_TR6 Posted August 18, 2021 Author Report Share Posted August 18, 2021 Package arrived today, but i’m away on Sapphire, i think its the relays so i’m thinking i might make the units on Friday. they’ll all need testing but might benready next week for the lucky few :-) steve Quote Link to post Share on other sites
John Morrison Posted August 18, 2021 Report Share Posted August 18, 2021 Cushty. Quote Link to post Share on other sites
Kevo_6 Posted August 18, 2021 Report Share Posted August 18, 2021 Hi Steve, another for parts list and wiring diagram, it’s for a 6. Thanks for all your hard work on this. Quote Link to post Share on other sites
Steves_TR6 Posted August 19, 2021 Author Report Share Posted August 19, 2021 Realys are in! some minor components still to arrive, eg loom tape, but i might get basic assembly done tomorrow i’ll have to take the unit out of my car to remind myself of the final configuration :-) steve Quote Link to post Share on other sites
Steves_TR6 Posted August 20, 2021 Author Report Share Posted August 20, 2021 (edited) Made a start this morning by extracting the prototype from the ‘test’ vehicle and reaquainted myself with the circuit. components gathered ready for assembly ! i’m still thinking of the neatest way to do this, and awaiting the Tesa loom tape which should be here today Aiming to have these sought after ‘First Edition’ units out in the post next week :-) steve PS, relay units are back in stock too so i can make more if this production run goes well. Edited August 20, 2021 by Steves_TR6 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.