simonjrwinter Posted September 10, 2013 Report Share Posted September 10, 2013 NTDWM, just surfing... http://www.ebay.co.uk/itm/Triumph-PI-EFI-MegaSquirt-Injection-GT6-2000-2500-2-5-Vitesse-TR6-/251334001221?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a84ac8245#ht_32462wt_1399 Quote Link to post Share on other sites
Tony Millward Posted September 10, 2013 Report Share Posted September 10, 2013 I commented on this in the buy and sell forum....copy below: Seriously, it would work out much cheaper to source the components yourself. There are plenty of us on the forums to advise. 511 quid is stupid. Tony Quote Link to post Share on other sites
KOB Posted September 10, 2013 Report Share Posted September 10, 2013 Tony what would be a sensible budget for this system ? I am running twin Strombergs on my CR series and still have boxed up the original PI system components but have been considering which way to go induction wise and if EFI can be achieved for less that £500 this seems the right way for me as I don't wish to improve performance but better fuel consumption and improve tick over. Quote Link to post Share on other sites
Richard Baines Posted September 10, 2013 Report Share Posted September 10, 2013 Budget depends really on how fancy an ECU you want to go for, you can have a really basic ECU for less than a couple of hundred quid, or spend well over £500 on MS3 and MS3X. The more you spend the more features you have and the less you'll have to do to modify it to get extra things going or configure it. For example, MS2 Extra can do a lot of what MS3 can, but some of those features have to be done to MS2 Extra by making additional circuits (eg. sequential fuel injection). Fully sequential injection is well worth having by the way. I initially ran my Spitfire on batch fire, and after converting it to sequential, it added a significant amount of torque and smoothness. There's also fuel economy benefits too. It's great as it avoids leaving fuel sat inside the intake, which means that it doesn't suffer from intake pulse reversion (where fuel gets spat back up the inlet tract), and is particularly beneficial in taming lairy cams. If it made that much improvement to the Spitfire with it's naff 260 degree 18-58 timing cam, I can only imagine what it'd do for the 280 degree TR5/6 CP profile cam. Quote Link to post Share on other sites
Tony Millward Posted September 10, 2013 Report Share Posted September 10, 2013 Hi Kob, Basically what Richard said although I am running a 'Batch Fire' system. I haven't noticed any spitting back up the inlets though but I do like the lumpiness when ticking over as it's more like the original. Once you get above 1500 RPM you won't notice the difference and my car is certainly not short on power. You should be able to put together a good EFI system for 500 quid or less depending on what you buy and where from. You have the choice of keeping all the equipment that you removed or selling it to cover the cost of EFI in which case you should have money left over. EFI has been discussed quite a few times and there are for's and against's, personally, I think it's great and so easy to tune with a laptop or my smartphone (yes, even that... ). Cheers Tony Quote Link to post Share on other sites
Steve P Posted September 10, 2013 Report Share Posted September 10, 2013 Hi Kob, I think £500 to £600 is a good price. Especially all in one package & including the modified parts. I've just been thru this process and spend around £1500 all in and that was trying to go low budget. If I was starting all over again and this opportunity came up I would take it. Cheers Steve Quote Link to post Share on other sites
Guest ntc Posted September 10, 2013 Report Share Posted September 10, 2013 . I haven't noticed any spitting back up the inlets though but I do like the lumpiness when ticking over as it's more like the original. Once you get above 1500 RPM you won't notice the difference Cheers Tony Tony I hope you do not mind me saying but it should not be lumpy. Quote Link to post Share on other sites
Tony Millward Posted September 11, 2013 Report Share Posted September 11, 2013 (edited) Hi Neil, I don't mind at all but I may have exaggerated a tadd when I described it as 'lumpy', it's not too bad at all. It runs fairly smooth very much like when on Lucas fuel injection...but certainly not as smooth as a modern car which is what I didn't want if you follow. Hi Steve, may I ask what EFI unit you are using? Cheers Tony Edited September 11, 2013 by Tony Millward Quote Link to post Share on other sites
Steve P Posted September 11, 2013 Report Share Posted September 11, 2013 Morning Tony, I fitted a Microsquirt V3. Just got it running ok to drive and the starter failed. Its not running smooth yet but I really need to get it out on the road. I've got a full list of materials used if anyone is interested. Thanks Steve Quote Link to post Share on other sites
KOB Posted September 11, 2013 Report Share Posted September 11, 2013 Mmmm Tony do you mean 500-600 for new components ? I have a complete Lucas system boxed and in store just in case I ever wanted to refit. The appeal for this one on ebay is that I would be able to keep my inlets as are without mods should I wish to refit. So are the panel saying that 500 is already to much to pay for the bits on ebay ? I do want to improve fuel economy on my 6, not for any reason other than I just want to !!! Quote Link to post Share on other sites
Tony Millward Posted September 11, 2013 Report Share Posted September 11, 2013 Hi Kob, I think you would be hard pressed to obtain everything you need buying new for 500 quid. You can buy cheaper secondhand though. Steve, It would be a good idea to post your list, we could add/make amendments/comment on parts as we go. This could possibly help others in the decision making of EFI. Cheers Tony Quote Link to post Share on other sites
Steve P Posted September 11, 2013 Report Share Posted September 11, 2013 Materials desciption Cost £ Supplier ECU Microsquirt V3 300.00 Trigger-wheels USB serial adaptor for above 15.00 Trigger-wheels Wiring harness 12" (delux loom kit) 18.00 Trigger-wheels Trigger wheel (7.25" x 5.75") 25.00 Trigger-wheels Crank sensor+connector: 20.00 Trigger-wheels Sensor bracket 15.00 Trigger-wheels Relays x 2 30.00 ExtraEFI New fuse box + fuses 20.00 Ebay Shielded wire 4.00 Trigger-wheels Water temp sensor 20.00 ExtraEFI Tuner Studio - Software 65.00 Fuel System Fuel pipe braided 20.00 Ebay Fuel fittings AN6 various 80.00 Ebay Injectors 156cc/min Audi 2.6V6 35.00 Ebay Fuel injector connector kit 15.00 Trigger-wheels Fuel rail 40.00 Trigger-wheels Fuel pump Bosch 070 (130litres/hr at 44psi (3bar)) 72.00 Ebay Fuel regulator 44psi 50.00 Ebay Fuel filter Using original Induction Throttle bodies - Old PI 35.00 TR-Register Inlet air temp sensor IAT 21.00 ExtraEFI Manifold air pressure MAP sensor 35.00 Trigger-wheels Fabricate flange for throttle body to plenum 100.00 Single throttle body + TPS. 18.00 Ebay Modeo 2.5V6 Vacuum hose 6.00 Trigger-wheels Idle Valve 20.00 Ebay Cone air filter 20.00 ASN Air filter connector 20.00 ASN Idle valve filter 5.00 ASN Ignition EDIS module: 6-cylinder, 45.00 Trigger-wheels Coil pack 85.00 Trigger-wheels Coil bracket 20.00 Trigger-wheels 6-cylinder coilpack connector 20.00 Trigger-wheels Plug leads (bits to convert existing) 30.00 Trigger-wheels Exhaust Wideband Lambda sensor 100.00 Ebay Manifold 3-2 75.00 TR-Register Exhaust Y Piece 2-1 short TH6003X 60.00 Moss Exhaust Y Piece 1-2 long 130.00 Moss Exhaust clamps various 50.00 Ebay Quote Link to post Share on other sites
Tony Millward Posted September 12, 2013 Report Share Posted September 12, 2013 Great list Steve, there are a few parts listed that may not be essential to everyone but it's comprehensive to say the least. I am assuming that the prices quoted are for new parts so a big saving could be made going used on some parts...I won't even bother editing it as it is complete. The cost of an EFI system would be a lot higher if one was to use a production made Control Unit....Megasquirt does make it cheaper for the masses and it does work well (no connection, just happy customer). If anyone one is contemplating fitting an EFI system please feel free to contact me for any help or advice as I'm sure others who have done this would also be happy to help. I don't think I would have changed mine had it not been for the help from forum members and I must admit, I'm very glad I did. Cheers Tony Quote Link to post Share on other sites
Nick Jones Posted September 12, 2013 Report Share Posted September 12, 2013 Ah, I remember that one. In fact I think I built the ECU. Worked very well on the original install. Note that the Throttle bodies are modified (angled cut 'n shut) to give bonnet clearance on a GT6 so might not be ideal for a TR6. £ 511 is a very good price for that lot and I expect it will go a fair bit higher. Yes, you could do it for less but only if you don't count your time. Cheers Nick Quote Link to post Share on other sites
alan atkinson Posted September 12, 2013 Report Share Posted September 12, 2013 Seems cheap to me. BTDT - you'll spend more doing all that yourself. Quote Link to post Share on other sites
Alec Pringle Posted September 12, 2013 Report Share Posted September 12, 2013 Five hundred quid for a known quantity, decent condition, system in kit form ? For the average enthusiast with limited time and funds that has to be an economical solution . . . . compared to starting from scratch and spending heaven only knows how many hours and squiddlies learning by trial and error as you move up the learning curve. If it isn't, time to give up TRs in favour of equine dentistry. Cheers Alec Quote Link to post Share on other sites
Nick Jones Posted September 13, 2013 Report Share Posted September 13, 2013 Equine dentistry?? Nick Quote Link to post Share on other sites
Alec Pringle Posted September 13, 2013 Report Share Posted September 13, 2013 Hi Nick, gift horses and looking in the mouths thereof . . . . . Cheers Alec Quote Link to post Share on other sites
Nick Jones Posted September 13, 2013 Report Share Posted September 13, 2013 Ah..... was thinking in the wrong direction. I know an actual equine dentist (very odd career choice) - tool bag could be confused with a carpenters! Nick Quote Link to post Share on other sites
TriumphV8 Posted October 19, 2014 Report Share Posted October 19, 2014 Older thread but still very interesting. I started with a MS1 for 160USD on the Rover V8 and later looked for a bargin in Ebay UK for TR6 PI-manifolds to convert the 6 cylinder to MS2 what was my second system.. Quote Link to post Share on other sites
Roadster Man Posted January 7, 2019 Report Share Posted January 7, 2019 Message to Tony Millward. I realise this is a very old topic but now in my retirement I’m contemplating converting my ‘71 TR6 to Megasquirt EFI My car is a USA spec car that I rebuilt and converted to RHD between 1989-1992 nd much modified. BTW I have lived in Sydney since 1979 and am also an ex Pom but from Portsmouth. I was trained as a mechanical engineer then worked as a design draughtsman until I went into senior management and allowed to wear a ‘white shirt’ instead of a blue one, so I can handle a spanner or three. Im trying to get my head around all the EFI acronyms and technology to understand everything that I need to do this conversion correctly. I’m not that great with computerised gadgets but I get by OK and if I’m stuck I have a very clever Son In Law who is a trained aircraft engineer and is very good that area and with electronics etc. Whereas I much prefer playing with an engine to a circuit board but I’m sure that this project will keep me on a steep learning curve for a while yet. I have a complete Lucas PI kit tucked away which is from a 2.5 sedan so would like to use those throttle bodies if I can if for no other reason than to just save a few $. They also look good and original which is the look Id like to achieve. I’ve researched the market as to what’s available and have decided upon the Megasquirt system but I’m not sure which system to go for. Funds are a problem, not that I’m destitute, but I can’t justify throwing thousands of dollars at a car which doesn’t get used that much. Id like to discuss the carb to EFI conversion with somebody who’s been there and done that so to speak and gain a better insight so if you’d care to share your experiences with me Tony, I’d very much appreciate an email exchange. My email address is: ‘raybaker06@bigoind.com’ I hope that you can assist me and look forward to hearing from you Tony. Best regards Ray Baker Quote Link to post Share on other sites
JochemsTR Posted January 7, 2019 Report Share Posted January 7, 2019 Ray, I am just done with my EFI Installation with Kent 280 cam. ECU is a ECUMASTER EMU Black. Look into this. Ignition is wasted spark, I am no longer using the distributor. TBs are CR bored to CP. I am in the midst on running and tuning on a dyno bench. Feel free to contact me thru PM to get personal contact data. Jochem Quote Link to post Share on other sites
foster461 Posted January 7, 2019 Report Share Posted January 7, 2019 Hi Ray and welcome. We have not seen Tony for over a year but hopefully there are other people that have some experience and/or an interest in TR6 EFI. Stan Quote Link to post Share on other sites
TriumphV8 Posted January 7, 2019 Report Share Posted January 7, 2019 Hi Ray you should invite us to visit the Blue Mointains than the EFI can be set right with the experts at your side! MS1, 2 or 3 can do the job. MS1 is for the price and with the old board below 200 USD MS2 with 3,0 board allows triggering with VR sensor from the crank and has an automotive CPU MS3 has some gimmicks we might not need but USB connection and logging with store chip on board. It is MS2 with an additional board. No need for more injection channels and crazy things. Look at DIY autotune for the MS and stim and water temp and air temp sender. If you go for MS2 add the com to usb converter to avoid trouble. And do not forget to keep us informed about the progress! Quote Link to post Share on other sites
Richard Pope Posted January 11, 2019 Report Share Posted January 11, 2019 I fitted a MegaSquirt EFU wasted spark set up to may Dax Rush. I thought it would be simple as I bought a complete kit but it was a nightmare. No support from the (well known) kit supplier but lots of support from the MS Forum who eventually identified the setting problem after weeks of getting nowhere. I have to say the MS system is fantasitic especially the self-tuning / mapping facility (drive along with laptop connected and it does the work for you) but you are on your own to get it sorted as you really do have to know what all the settings mean and I really struggled with that even though I thought I knew a lot and understand computers, as many settings are very obscure (to me). There is one guy who really knows his stuff in the UK with a rolling road in Telford. I went there twice and can recommend him. Other than that, you are really on your own as it is a DIY system. One very important thing to get it right is to follow the wiring diagrams EXACTLY and that means ensuring the earth connections are exactly as stated even to where the conevtion is positioned. When I say exact, I mean exact and make sure you have the correct wiring diagrams too. I was supplied with the wrong ones. Mine is an MS2 Extra but definately go for MS3 now. The bluetooth link is just what you need, so simple and allows you much more. I am definately thinking of converting my TR6 to EFI but do fear an(other) MS installation Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.