had17462

Roger is it the difference between the 4&5 models Nick

Spacers might work ,re brake upgrade bought them years ago always used standard so maybe have them if I can resolve the issue,will look at some wheels I wanted to used my rostyles tbh so not period a no go, hub does not catch but the caliper touches the inside of the wheel . not had a reply yet from rally design and they don’t have a phone contact any more thanks guys Nick

Hi all slowly building up the chassis I have put together the Willwood front disc & caliper conversion also using an alloy hub with standard stub axle ,but when I tried to put a wheel on u guessed it it won’t cover the caliper, annoying but contacted willwood but they say rally design made the kit using there parts but the disc looks to big , obviously I bought it years ago so no chance of changing it but is there a 16 inch wheel that’s fits the tr5 1st pic the wheel only goes on a few inches 2nd pic it goes on but catches the caliper regards. Nick

Steve when I did it I used masking tape along the panels ,marked where I wanted the holes new drill bit all good, hopefully Stuart will answer as he does this often Nick

Just asking would it be covered on your car insurance . Nick

Sounds like a nice car but like many cars that have had to much money spent on them for what one can get back but hopefully you find a buyer ,but you do need to let us know what price you think it would sell in OZ so the guys on here can really help /give an opinion. Nick

Chris if Robins are not what you are looking for let me know I think I have a pair. Nick

Thx guys. N

Hi all , as I am trying to find parts in the garage for my restoration I keep coming across things I bought years ago ,as I’ve got the gearbox rebuilt ages ago and not used I ve just found this ,should I use it or keep what’s in place regards Nick.

Thx guys , just spoke to Martin and he’s got me a pair Nick

John try Helen at tr improvements I believe she has a few of them . N

Hi Ernest not meaning to hijack the thread re drive shafts and hubs ,I have got these which I bought along time ago but I can’t remember who from would I need to use any specific uj,s for the shafts . Nick

Thx guys N

Pete very tidy Nick

Hi all ,anyone bought the sc parts rear hubs & Shafts seems good value. regards Nick

Nice looking car ,I believe the door should have two clicks ,when closing slowly you should be able to hear this if not a slight adjustment might be needed or the lock could be tired/worn maybe some wd40 etc will help as it’s been sitting . Nick

Conrad thanks ,it does sound good hopefully it gets a strong attendance. N

Very nice looking car . N

Hi Ken ,letter D plus numbers N

Hi again , the chassis is spot on but Tim that tag you have is on all chassis as Stuart said ,on my one the tag is on the n/s front chassis rail looking rear wards. Keeping the original diff that’s one thing less to worry about. n Nick

Hi Tim it’s on the n/s front before suspension turret. Nick

Hi all , after buying my car along time ago and selling my last tr I’ve finally got space to get the car back on the road obviously it’s going to take some time but I have got a great start when I was lucky enough to buy it the owner purchased a brand new unused chassis from a main dealership it was hanging from the ceiling on display,had a slight sand blast and had the strengthening bits attached and powdered coated about ten years ago . after dusting it down I found a number on a tag not sure I’ve seen that before. Not restored one for along time and I am sure I will need he

Hi Gordon I could possibly have one will check in morning Nick