KOB Posted May 4, 2015 Report Share Posted May 4, 2015 Hi Guys I am looking to fit spot and fog lights to the front of my 6. I know that TR6's do not really lend themselves to supplementary lighting, but does anyone have any pictures of a 6 with additional lights fitted they can post here ? I have a lucas round set and a rectangular set as well so can choose between. thanks Quote Link to post Share on other sites
wheeler Posted May 4, 2015 Report Share Posted May 4, 2015 Hi These are Lucas spot and fog. Wiring diagram for fog and spot here http://www.advanceautowire.com/ Hope this helps Bill Quote Link to post Share on other sites
whatmore179 Posted May 4, 2015 Report Share Posted May 4, 2015 I've got Cibie Tangos and fogs on mine. I would post a picture but I don't know how to. Steve Quote Link to post Share on other sites
KOB Posted May 5, 2015 Author Report Share Posted May 5, 2015 Hi These are Lucas spot and fog. Wiring diagram for fog and spot here http://www.advanceautowire.com/ Hope this helps Bill Same colour as mine, so I can see exactly how it would look. thank you Are there any issues with the bonnet tipping forward, ie clearance ? Quote Link to post Share on other sites
TR NIALL Posted May 5, 2015 Report Share Posted May 5, 2015 I've seen the Light. Quote Link to post Share on other sites
TR NIALL Posted May 5, 2015 Report Share Posted May 5, 2015 Mike the King of Bling also has a nice Twin Headlight setup on his Red 6,all Reversible if you want to change back to Original. Quote Link to post Share on other sites
Graze Posted May 5, 2015 Report Share Posted May 5, 2015 Mike the King of Bling also has a nice Twin Headlight setup on his Red 6,all Reversible if you want to change back to Original. I've been debating this in my mind also and Mike's is the best I've seen but I don't want to cut into the grille Just picked up a cheap set of Cibie rectangular spots so going to try them either under the bumper or maybe behind the grille Graze Quote Link to post Share on other sites
TR NIALL Posted May 5, 2015 Report Share Posted May 5, 2015 Graze look at the 2 Lights I've installed in the Grille there is No Cutting of the Grille whatsoever,the only thing I omitted was the Centre Alloy Bar as I did not want to cut it,Simples. Quote Link to post Share on other sites
KOB Posted May 5, 2015 Author Report Share Posted May 5, 2015 Niall, am I missing something ? I can only see the standard pair of driving lights. Quote Link to post Share on other sites
mike3739 Posted May 5, 2015 Report Share Posted May 5, 2015 Here they are again, for anyone interested I did try lights behind the grille not pleased hence my conversion. Cheers Mike Quote Link to post Share on other sites
mike3739 Posted May 5, 2015 Report Share Posted May 5, 2015 (edited) Niall, am I missing something ? I can only see the standard pair of driving lights. Hi KOB you need to look at post No 5 at the picture. Cheers Mike Edited May 5, 2015 by mike3739 Quote Link to post Share on other sites
TR NIALL Posted May 5, 2015 Report Share Posted May 5, 2015 Click on the Small Image in Post 5 all should be revealed. Quote Link to post Share on other sites
elclem1 Posted May 5, 2015 Report Share Posted May 5, 2015 Fellas I like you lights! Are they actually fitted into the grill? Andy Quote Link to post Share on other sites
mike3739 Posted May 5, 2015 Report Share Posted May 5, 2015 Fellas I like you lights! Are they actually fitted into the grill? Andy Hi Andy Mine are, with both main & dipped beam 5 3/4 inch headlamps set in plasic bowls, you only need to cut the grille & a couple of holes in front panel to mount the bowls. Both the original headlamps & the inner ones are HID conversions & never failed an MOT. Cheers. Mike Quote Link to post Share on other sites
wheeler Posted May 5, 2015 Report Share Posted May 5, 2015 Hi KOB No problem with bonnet catching Bill Quote Link to post Share on other sites
KOB Posted May 5, 2015 Author Report Share Posted May 5, 2015 Arh, all is now clear.thanks chaps Quote Link to post Share on other sites
TR NIALL Posted May 5, 2015 Report Share Posted May 5, 2015 Andy,I've gone a different way,2 Spot Lights Drilled 10mm through the Centre of the back of the Bowls,70mm Bolt with a 3" Square 2.5mm Plate 10mm hole in centre,put flat up against Grille and put another Plate on inside of Grille and Bolt together using the Grille as the Clamp.No Cutting of the Grille whatsoever all I removed was the Centre Bar which was held on with small fixings,I have mine Wired with Relays and come on as Full Headlights. Quote Link to post Share on other sites
Graze Posted May 5, 2015 Report Share Posted May 5, 2015 Niall, Mike Thanks lads plenty to consider from those 2 options Graze Quote Link to post Share on other sites
whatmore179 Posted May 9, 2015 Report Share Posted May 9, 2015 (edited) And here's mine Steve Edited May 9, 2015 by whatmore179 Quote Link to post Share on other sites
foster461 Posted May 10, 2015 Report Share Posted May 10, 2015 later TR6 with Cibie fog lamps mounted low and wide. Quote Link to post Share on other sites
B Fitzpatrick Posted May 11, 2015 Report Share Posted May 11, 2015 If you go to page 2 of the topic "TR6 in France" I have posted an image of what Niall's car looks like now! Regards Quote Link to post Share on other sites
foster461 Posted May 11, 2015 Report Share Posted May 11, 2015 If you go to page 2 of the topic "TR6 in France" I have posted an image of what Niall's car looks like now! Regards Link: http://www.tr-register.co.uk/forums/index.php?/topic/51839-tr6-in-france/?p=424482 Quote Link to post Share on other sites
ShaunC Posted May 12, 2015 Report Share Posted May 12, 2015 Come on with full beam... Quote Link to post Share on other sites
simonjrwinter Posted May 13, 2015 Report Share Posted May 13, 2015 Niall, your inbox is full Simon Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.