graeme Posted January 23, 2017 Report Share Posted January 23, 2017 I am inspecting parts following the strip down of the motor and I spot this. Anybody else spot it? Cheers Graeme Quote Link to post Share on other sites
iain Posted January 23, 2017 Report Share Posted January 23, 2017 Oh Dear! Quote Link to post Share on other sites
BlueTR3A-5EKT Posted January 23, 2017 Report Share Posted January 23, 2017 Probably stopped the spring end wearing a hole in the side of the cover..... Quote Link to post Share on other sites
Lebro Posted January 23, 2017 Report Share Posted January 23, 2017 Oops better turn it round Bob. Quote Link to post Share on other sites
Fireman049 Posted January 23, 2017 Report Share Posted January 23, 2017 Ouch! ~ Lucky for you, Graeme! Tom. Quote Link to post Share on other sites
RogerH Posted January 23, 2017 Report Share Posted January 23, 2017 Hi Graeme, not realising what car it was from I immediately centred on the lack of attachment hole for the mid support stud - clever me Then thought 'hang on a mo that don't look right' having found the proper fault. So I found the fault and I also found 'not the fault' Roger Quote Link to post Share on other sites
Drewmotty Posted January 23, 2017 Report Share Posted January 23, 2017 Excellent news the wearing surface will still be like new :-) Quote Link to post Share on other sites
foster461 Posted January 23, 2017 Report Share Posted January 23, 2017 Its a timing cover tensioner. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.