marki Posted March 10, 2020 Report Share Posted March 10, 2020 Hi All. I'm trying to find a suitable repalecment for the inlet duct as they are no longer available. the internal dia is 80mm, has anyone come up with an option. cheers Mark. Quote Link to post Share on other sites
jerrytr5 Posted March 10, 2020 Report Share Posted March 10, 2020 Have you tried car builder solutions or merlin motorsport? https://www.carbuilder.com/uk/search?adv=false&cid=0&mid=0&vid=0&q=duct&sid=false&isc=true&orderBy=0 Jerry Quote Link to post Share on other sites
Drewmotty Posted March 10, 2020 Report Share Posted March 10, 2020 Try T7 Designs in Exeter. Just bought some excellent 32mm from them for heater demisters. Quote Link to post Share on other sites
Nigel Triumph Posted March 10, 2020 Report Share Posted March 10, 2020 How about this, from James Paddock for £7.95? http://www.jamespaddock.co.uk/hose-air-cleaner-to-manifold-2 Nigel Quote Link to post Share on other sites
Peter V W Posted March 10, 2020 Report Share Posted March 10, 2020 Hi Mark, Got mine from Demon Tweeks. regards Peter Quote Link to post Share on other sites
Waldi Posted March 10, 2020 Report Share Posted March 10, 2020 If you mean the hose: I recently bought one from Moss, it was too short. When I contacted Moss, a new, longer one was sent FOC, no questions asked (I showed some pics and mailed my observations. Good service, we all make mistakes. These are the alu/paper ones, with a very tight fit on the plenum (the other end wasn't an issue). My old one was plastic. What is original? Waldi Quote Link to post Share on other sites
marki Posted March 10, 2020 Author Report Share Posted March 10, 2020 As ever, thanks for the replies. Cheers Mark. Quote Link to post Share on other sites
Paulsb Posted March 10, 2020 Report Share Posted March 10, 2020 got mine over the counter at david manners about 7 quid Quote Link to post Share on other sites
Keith66 Posted March 11, 2020 Report Share Posted March 11, 2020 Hi Paul When did you get your hose from DMG as i couldn't get one for that price recently. I'm assuming we are talking baout 149692, air cleaner to plenum hose. I tend to look up the part no's on the Rimmers site and then check DMG for the price as they are close and i also buy over the counter. But on this Rimmers were £7.50 and DMG £20.50 showing no stock or £35.28 currently unavailable and they were not able to offer alternatives, so i got one from Rimmers at the same time as my H4 headlamp conversion kit. Fortunatly they some reductions on until last week. Cheers Keith Quote Link to post Share on other sites
Paulsb Posted March 11, 2020 Report Share Posted March 11, 2020 apparently its no longer available i had the last of some old stock Quote Link to post Share on other sites
Keith66 Posted March 11, 2020 Report Share Posted March 11, 2020 Paul You nicked my bit!! The expensive one is apparently OE spec and much nicer but i went for the cheap and cheerful version as its only a bit of hose. It came the other day and its ok but not cut very neatly, so i'll need to tidy that up a bit and test fit it to make sure its long enogh. Cheers Keith Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.