Jump to content
RichyBarber

Throttle body retaining nuts - access

Recommended Posts

Hi,

 

Any tips on spanner / socket type to access the 3 nuts that secure the throttle bodies - spanner wont fit in the well / extreme difficulty !!

Thanks in advance

Share this post


Link to post
Share on other sites

If its the top three,   Its tight but a 1/2" AF ring is the best but you may have to reduce the outer part of the ring of the spanner to be able to get in there.

Share this post


Link to post
Share on other sites

As John says,

I have a slim ring-spanner that fits nicely on all 3x3 nuts.

Waldi

Share this post


Link to post
Share on other sites

 You can try 1/4 inch ratchet set  thanks  billy

 

Share this post


Link to post
Share on other sites
On 3/13/2019 at 10:44 AM, Waldi said:

As John says,

I have a slim ring-spanner that fits nicely on all 3x3 nuts.

Waldi

+1. That worked for me.

Nigel

Share this post


Link to post
Share on other sites
On 3/13/2019 at 10:44 AM, Waldi said:

As John says,

I have a slim ring-spanner that fits nicely on all 3x3 nuts.

Waldi

This worked for me too.

Dave McD

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.