RichyBarber Posted March 13, 2019 Report Share Posted March 13, 2019 Hi, Any tips on spanner / socket type to access the 3 nuts that secure the throttle bodies - spanner wont fit in the well / extreme difficulty !! Thanks in advance Quote Link to post Share on other sites
John L Posted March 13, 2019 Report Share Posted March 13, 2019 If its the top three, Its tight but a 1/2" AF ring is the best but you may have to reduce the outer part of the ring of the spanner to be able to get in there. Quote Link to post Share on other sites
Waldi Posted March 13, 2019 Report Share Posted March 13, 2019 As John says, I have a slim ring-spanner that fits nicely on all 3x3 nuts. Waldi Quote Link to post Share on other sites
DOG_MORGAN Posted March 16, 2019 Report Share Posted March 16, 2019 You can try 1/4 inch ratchet set thanks billy Quote Link to post Share on other sites
harrytr5 Posted March 16, 2019 Report Share Posted March 16, 2019 I just ground a ring spanner to fit. Regards Harry TR5 Nutter Quote Link to post Share on other sites
Nigel Triumph Posted March 16, 2019 Report Share Posted March 16, 2019 On 3/13/2019 at 10:44 AM, Waldi said: As John says, I have a slim ring-spanner that fits nicely on all 3x3 nuts. Waldi +1. That worked for me. Nigel Quote Link to post Share on other sites
Dave McDonald Posted March 16, 2019 Report Share Posted March 16, 2019 On 3/13/2019 at 10:44 AM, Waldi said: As John says, I have a slim ring-spanner that fits nicely on all 3x3 nuts. Waldi This worked for me too. Dave McD Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.