Devs Posted February 16, 2010 Report Share Posted February 16, 2010 Just trying to find images of engine bays to answer a question I had & stumbled across this (as you do). Stretched TR Quote Link to post Share on other sites
John Soffe Posted February 16, 2010 Report Share Posted February 16, 2010 Just trying to find images of engine bays to answer a question I had & stumbled across this (as you do). Stretched TR I want one!! Quote Link to post Share on other sites
Tony Millward Posted February 16, 2010 Report Share Posted February 16, 2010 What a great project!! Tony Quote Link to post Share on other sites
jean Posted February 16, 2010 Report Share Posted February 16, 2010 That looks great, now a TR6 with the same treatment and a V8 inside Quote Link to post Share on other sites
stuart Posted February 16, 2010 Report Share Posted February 16, 2010 I want one!! Wouldnt take long with a 9" disc cutter and a good welder Stuart. Quote Link to post Share on other sites
88V8 Posted February 16, 2010 Report Share Posted February 16, 2010 Wouldnt take long with a 9" disc cutter and a good welder What, less than 681 hours? Ivor Quote Link to post Share on other sites
alan atkinson Posted February 16, 2010 Report Share Posted February 16, 2010 That looks great, now a TR6 with the same treatment and a V8 inside Talk to LITA (Long Island Triumph Association). That was their project a few years back. Quote Link to post Share on other sites
roy53 Posted February 16, 2010 Report Share Posted February 16, 2010 What a great project!! Tony Tony your TR6 seems to be climbing the wall,has it had enough of you? or are you up there with it? Roy Quote Link to post Share on other sites
TomMull Posted February 17, 2010 Report Share Posted February 17, 2010 I normally cringe at modifications to sidescreens (e.g. 5 speeds and steering racks) and a rust free example to boot, but these is quite a lot in this that you just have to admire. Tom Mulligan Quote Link to post Share on other sites
Don Elliott Posted February 17, 2010 Report Share Posted February 17, 2010 While at the Roadster Summer Party in Pennsylvania, (combined with the VTR National Event) back in August 2003, I saw a frame for a TR6 which was finished and ready to accept a TR body which had 7" added across the width of the car. I haven't heard about this TR6 since but it makes for a very sleek low-slung and wide car. Quote Link to post Share on other sites
TR3BGeorge Posted February 27, 2010 Report Share Posted February 27, 2010 I wish I had his knowledge and skills. Not that THAT is what I would DO with them; I just wish that I COULD do it. It is quite a masterpiece. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.