alanwcoote Posted January 15, 2021 Report Share Posted January 15, 2021 Morning Gents Could you please help . I’m looking for part number 602064 x2 door pull end finisher, apparently no longer available. What are people using and where from is the question Thanks Al Quote Link to post Share on other sites
RogerH Posted January 15, 2021 Report Share Posted January 15, 2021 Hi Alan, from the Moss WebCat image (very small) it looks very similar to the TR4 sun visor bracket end attachment. If it is then it could be quite easy to reproduce from a small lump of Aluminium alloy. Lets see what the forum can come up with first. Roger Quote Link to post Share on other sites
stuart Posted January 15, 2021 Report Share Posted January 15, 2021 41 minutes ago, RogerH said: Hi Alan, from the Moss WebCat image (very small) it looks very similar to the TR4 sun visor bracket end attachment. If it is then it could be quite easy to reproduce from a small lump of Aluminium alloy. Lets see what the forum can come up with first. Roger Not really Roger it is small, I dont have one here but this might give you an idea of scale Stuart. Quote Link to post Share on other sites
BlueTR3A-5EKT Posted January 15, 2021 Report Share Posted January 15, 2021 Covered before I ordered a couple of kits made by Macy’s from TRF Quote Link to post Share on other sites
stuart Posted January 15, 2021 Report Share Posted January 15, 2021 (edited) Quick solution is these crimped in a bit https://www.woolies-trim.co.uk/product/1347/hidem-end-cap Stuart. Edited January 15, 2021 by stuart Quote Link to post Share on other sites
Lebro Posted January 15, 2021 Report Share Posted January 15, 2021 (edited) Agree, they should do the job. This a real one. This the Wollies one. Bob Edited January 16, 2021 by Lebro Quote Link to post Share on other sites
BlueTR3A-5EKT Posted January 15, 2021 Report Share Posted January 15, 2021 (edited) The Lambretta Li floor board rubber end caps £12.99 https://beedspeed.com/collections/lambretta-floor-and-fixings/products/lambretta-floor-runner-end-caps-li-stainless-steel or single aluminium ones at £2.00 https://beedspeed.com/collections/lambretta-floor-and-fixings/products/lambretta-floor-runner-end-cap-li150-series-1-and-2 Edited January 15, 2021 by BlueTR3A-5EKT Quote Link to post Share on other sites
alanwcoote Posted January 15, 2021 Author Report Share Posted January 15, 2021 Food for thought there guys many thanks. The woolies option will be my starting point, would be interesting to know what the pro trimmers use thinking about cars that may have had theses items used as well: XK Jags , Healeys , Frog eyes , mini etc Quote Link to post Share on other sites
stuart Posted January 15, 2021 Report Share Posted January 15, 2021 39 minutes ago, alanwcoote said: Food for thought there guys many thanks. The woolies option will be my starting point, would be interesting to know what the pro trimmers use thinking about cars that may have had theses items used as well: XK Jags , Healeys , Frog eyes , mini etc XK had proper inner door handles. Healeys same, Dont know about Frogeyes and Minis had them inside the door frame so didnt need a finisher. Stuart. Quote Link to post Share on other sites
cjstoodley Posted January 15, 2021 Report Share Posted January 15, 2021 Hi Alan, Macy’s in the USA offer the full door pull kit for $39.50 + shipping You can find them on eBay under Macy’s Triumph Garage I obtained a set for my car - they are excellent quality. Maybe a bit pricey if you are only looking for the end-cap finisher. Good luck, Chris Quote Link to post Share on other sites
cjstoodley Posted January 15, 2021 Report Share Posted January 15, 2021 1 minute ago, cjstoodley said: Hi Alan, Macy’s in the USA offer the full door pull kit for $39.50 + shipping You can find them on eBay under Macy’s Triumph Garage I obtained a set for my car - they are excellent quality. Maybe a bit pricey if you are only looking for the end-cap finisher. Good luck, Chris By the way, their part number for the kit is MCY 113 Chris Quote Link to post Share on other sites
BlueTR3A-5EKT Posted January 15, 2021 Report Share Posted January 15, 2021 1 hour ago, cjstoodley said: By the way, their part number for the kit is MCY 113 Chris Thanks link https://www.ebay.com/sch/m.html?item=133375552107&ul_noapp=true&ul_ref=https%3A%2F%2Frover.ebay.com%2Frover%2F1%2F711-53200-19255-0%2F1%3Ficep_ff3%3D2%26pub%3D5574933636%26toolid%3D10001%26campid%3D5337487963%26customid%3D%26mpre%3Dhttps%253A%252F%252Fwww%252Eebay%252Ecom%252Fitm%252FTriumph-TR2-3-Door-Latch-Pull-Strap-Set-MCY113-%252F133375552107%26srcrot%3D711-53200-19255-0%26rvr_id%3D2769948560361%26rvr_ts%3D07f5ec4d1770a9cc72e7da57ffe95e19&_ssn=pmmgarage&rt=nc Peter W Quote Link to post Share on other sites
John McCormack Posted January 16, 2021 Report Share Posted January 16, 2021 I have a few pairs here in Australia. A bit far to make it worthwhile to provide a pair to you. Quote Link to post Share on other sites
stuart Posted January 16, 2021 Report Share Posted January 16, 2021 TBH unless going for concours I would just fit the Woolies item. Stuart. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.