Tim D. Posted September 12, 2018 Report Share Posted September 12, 2018 There's also a place near Silverstone who will balance the wheels in situ on the car. Did this for a lotus i had. Worked a treat. Tim Quote Link to post Share on other sites
Tim D. Posted September 12, 2018 Report Share Posted September 12, 2018 Company was called vibration free in bicester Quote Link to post Share on other sites
Z320 Posted September 12, 2018 Report Share Posted September 12, 2018 There are others offering the same technology https://www.youtube.com/watch?v=ullnFQD4F1I + some more videos on Youtube. Perhaps we are caught in our small world, not ready for new ideas? Who is brave enought to check? Quote Link to post Share on other sites
stillp Posted September 12, 2018 Report Share Posted September 12, 2018 Hi Folks, I get my wheels done locally in W.London. The proprietor is Balan Singh - a good chap. Roger Quote Link to post Share on other sites
RogerH Posted September 12, 2018 Report Share Posted September 12, 2018 I thought it was wasted. Roger Quote Link to post Share on other sites
Tim D. Posted September 12, 2018 Report Share Posted September 12, 2018 :-) Quote Link to post Share on other sites
Hamish Posted September 12, 2018 Report Share Posted September 12, 2018 I thought it was wasted. Roger All too scared of being racially incorrect. Clever one Roger :-) Quote Link to post Share on other sites
TriumphV8 Posted September 13, 2018 Report Share Posted September 13, 2018 Hmmmm, you could buy them, use them, find out and report? Ciao Marco I have three of them, simply got them from ebay bids where nobody else gave a bid. The cheapest I got was for 15 Euros where thieves cut off all the wires. The last was a nearly new item with two vibration sensors and an additional rotation sensor for opposite side. All works pretty well since years and it is easy to use only problem is that it takes space like a gocart or a motorbike and needs 380 volts. Quote Link to post Share on other sites
Z320 Posted September 13, 2018 Report Share Posted September 13, 2018 Andreas, sorry me, my post #22 is related to post #20, I started writing at the office before your post, got some telefon calls and send it after your post, I should have used the "quote" icon? By the way I own a Hofman finishbalancer SD10 but not everyone can do. So the dynabeads think could be more used by everyone - a very interesting think. Ciao marco Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.