Phil Read Posted August 9, 2022 Report Share Posted August 9, 2022 I have TR250 conveerted to RH drive and uprated to TR5 spec. The flashers have stopped working, its not the bulbs as they all flash when I set the alarm. Can any one tell me where the flasher unit is located? I cannot see it in the footwells. Thanks in advance. Quote Link to post Share on other sites
Peter V W Posted August 9, 2022 Report Share Posted August 9, 2022 (edited) Phil, On my car a RHD 5 it is fixed to the passenger side footwell. high up above the passenger’s feet! regards Peter Edited August 9, 2022 by Peter V W Photo added Quote Link to post Share on other sites
openroad Posted August 9, 2022 Report Share Posted August 9, 2022 Ditto Conrad. Quote Link to post Share on other sites
Phil Read Posted August 9, 2022 Author Report Share Posted August 9, 2022 Thanks for that I found it behind the carpet, Its not standards possibly because of the alarm. Quote Link to post Share on other sites
stuart Posted August 9, 2022 Report Share Posted August 9, 2022 Same on a 250.Though you will have the hazard one next to it Stuart. Quote Link to post Share on other sites
Phil Read Posted August 9, 2022 Author Report Share Posted August 9, 2022 6 minutes ago, stuart said: Same on a 250.Though you will have the hazard one next to it Stuart. There is no hazard switch on the car. Quote Link to post Share on other sites
stuart Posted August 9, 2022 Report Share Posted August 9, 2022 5 minutes ago, Phil Read said: There is no hazard switch on the car. They obviously deleted it when they converted it. Stuart. Quote Link to post Share on other sites
Kenrow Posted August 11, 2022 Report Share Posted August 11, 2022 (edited) The original rectangle hazard relay is no longer available, its now replaced with a round 3 prong unit or some other options. Edited August 11, 2022 by Kenrow added info Quote Link to post Share on other sites
RobH Posted August 11, 2022 Report Share Posted August 11, 2022 6 hours ago, Kenrow said: The original rectangle hazard relay is no longer available Moss have them: https://www.moss-europe.co.uk/flasher-unit-hazard-warning-2-terminals-gfu204.html?assoc=126845 Quote Link to post Share on other sites
Kenrow Posted August 11, 2022 Report Share Posted August 11, 2022 I believe the 68 through 71 TR's which had a hazard installed used a 3-prong hazard flasher as in Peter's photo. Quote Link to post Share on other sites
RobH Posted August 11, 2022 Report Share Posted August 11, 2022 This then: https://www.autoelectricsupplies.co.uk/product/165/category/35 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.