John Morrison Posted November 25, 2021 Report Share Posted November 25, 2021 Morning folks, just fitte dthe last in stock of a group memebers oil filter, Fram number FT 4531A.Z25. Anyone tell me a couple of equivelents, that I can ask for at a local motor factors? John. Quote Link to post Share on other sites
JochemsTR Posted November 25, 2021 Report Share Posted November 25, 2021 (edited) TR6 Oilfilter – Thread 3/4-16UNF, OD: 76mm and ID: 62 mm Mann W712 Height: 79 mm Mahle OC110 Height: 120 mm Wix WL7074 Height: 80 mm Fram PH5713 Height: 74 mm Bosch P3033 Height: 123 mm Edited November 25, 2021 by JochemsTR Quote Link to post Share on other sites
graeme Posted November 25, 2021 Report Share Posted November 25, 2021 I always use a Fram PH3600 or TG3600, which seems to be a popular filter(Ford/Mazda/Jaguar) and easily available. Cheers Graeme Quote Link to post Share on other sites
trchris Posted November 26, 2021 Report Share Posted November 26, 2021 Hi John I use Mann W719/5 in the 4a Euro car part number 501770059 cheaper with there discount code as well Chris Quote Link to post Share on other sites
Michael Mckiernan Posted November 26, 2021 Report Share Posted November 26, 2021 20 hours ago, graeme said: I always use a Fram PH3600 or TG3600, which seems to be a popular filter(Ford/Mazda/Jaguar) and easily available. Cheers Graeme If you have a american / hot rod shop near you it's worth giving them a call. The Fram PH3600 AND TG3600 fits lots of american engines also if they are getting spares sent over they might do a deal on a bulk buy. I get a mate to bring over 2 or 3 when he travels for work , cost in the USA about £ 4.oo each Cheapest i have seen here is £ 13.50 . Great filter though. Mick. Quote Link to post Share on other sites
John Morrison Posted November 26, 2021 Author Report Share Posted November 26, 2021 Many thanks guys, My local, usually very good motor factors, quotes Bosch P2056, as a direct replacement for the Fram Ft 4531A. Can anyone confirm? John. Quote Link to post Share on other sites
graeme Posted November 26, 2021 Report Share Posted November 26, 2021 3 hours ago, John Morrison said: Many thanks guys, My local, usually very good motor factors, quotes Bosch P2056, as a direct replacement for the Fram Ft 4531A. Can anyone confirm? John. John, are you sure that is a Fram number? I found a Cooper/Fiamm filter with that number which cross references to a Bosch P2056. https://www.oilfilter-crossreference.com/convert/BOSCH/P2056 Cheers Graeme Quote Link to post Share on other sites
JochemsTR Posted November 27, 2021 Report Share Posted November 27, 2021 10 hours ago, John Morrison said: My local, usually very good motor factors, quotes Bosch P2056, whether it is a replacement for the FRAM Filter or not, it meets the specification I wrote in my first post (Thread-ID-OD). So yes, with 86,5mm height, this Bosch P2056 will fit. Quote Link to post Share on other sites
John Morrison Posted November 27, 2021 Author Report Share Posted November 27, 2021 10 hours ago, graeme said: John, are you sure that is a Fram number? I found a Cooper/Fiamm filter with that number which cross references to a Bosch P2056. https://www.oilfilter-crossreference.com/convert/BOSCH/P2056 Cheers Graeme Definately Graeme, I have the box. John. Quote Link to post Share on other sites
John Morrison Posted November 27, 2021 Author Report Share Posted November 27, 2021 3 hours ago, JochemsTR said: whether it is a replacement for the FRAM Filter or not, it meets the specification I wrote in my first post (Thread-ID-OD). So yes, with 86,5mm height, this Bosch P2056 will fit. Thats great Kochems, many thanks. John. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.