Tim T Posted June 23, 2020 Report Share Posted June 23, 2020 Not really technical but.. Does anybody know why the wire wheel spinners supplied by various well known companies carry what appears to me to be the Triumph motorcycle logo as below? Many thanks, Tim Quote Link to post Share on other sites
stillp Posted June 23, 2020 Report Share Posted June 23, 2020 Incompetence? Pete Quote Link to post Share on other sites
harlequin Posted June 23, 2020 Report Share Posted June 23, 2020 One or two may come in handy for sidecars George Quote Link to post Share on other sites
Hawk Posted June 23, 2020 Report Share Posted June 23, 2020 1 hour ago, stillp said: Incompetence? Pete Very true. I seem to recall a member pointing this out to a supplier and, let's just say he wasn't very appreciative of the feedback! Quote Link to post Share on other sites
Ian Vincent Posted June 23, 2020 Report Share Posted June 23, 2020 1 hour ago, Hawk said: Very true. I seem to recall a member pointing this out to a supplier and, let's just say he wasn't very appreciative of the feedback! That would have been me, and no he (TR Shop), was decidedly unappreciative. Rgds Ian Quote Link to post Share on other sites
stillp Posted June 23, 2020 Report Share Posted June 23, 2020 10 minutes ago, Ian Vincent said: That would have been me, and no he (TR Shop), was decidedly unappreciative. Rgds Ian Was that at Stoneleigh Ian? Pete Quote Link to post Share on other sites
BlueTR3A-5EKT Posted June 23, 2020 Report Share Posted June 23, 2020 Nice to know there are some specialists around still Quote Link to post Share on other sites
Ian Vincent Posted June 23, 2020 Report Share Posted June 23, 2020 48 minutes ago, stillp said: Was that at Stoneleigh Ian? Pete Nope, over the phone. Rgds Ian Quote Link to post Share on other sites
BlueTR3A-5EKT Posted June 23, 2020 Report Share Posted June 23, 2020 6 hours ago, Tim T said: Not really technical but.. Does anybody know why the wire wheel spinners supplied by various well known companies carry what appears to me to be the Triumph motorcycle logo as below? Many thanks, Tim I have been advised by someone who knows. - That is the prewar Triumph company logo. The logo use may be acceptable on a spinner if it were 12 tpi rather than today's common 8 tpi thread. The castic response was it is clearly an ashtray for a sidecar. Here is a good guidance https://motorcycle-logos.com/triumph-logo/ Cheers Peter W Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.