Jump to content

Door innards reinstall sequence

Recommended Posts


I need to reinstall the door channels, glass and top seals and it’s over a year since I took it all apart. What is the logical sequence for reinstall? Is it:


2)bottom bar and stop

3) winder mechanism

4) glass

5) inner and outer top seals

6) control arm for opening

I’m aware that the top seals are going to be awkward  to fit . But wasn’t sure, for instance, if one of them should be fitted pre glass  




Share this post

Link to post
Share on other sites

Sounds about right but it's long time since I did one. Don't fit the bottom stop until last as you'll need to drop the glass as far as possible to fit the weatherstrips.


Share this post

Link to post
Share on other sites

Make sure it is the “heavy duty” grade, which it thicker so there is less but still sufficient play for the glass.

I’m an “expert”on this, don’t ask why:)


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.