jfg Posted October 8, 2019 Report Share Posted October 8, 2019 (edited) Can someone tell what these holes in the chassis are for? They look like they have reinforcements inside them. I can't upload the picture even though it's only 2.9mb. The holes are toward the front end, they would in line with the radiator and are in a slightly off square rectangle shape. Edited October 8, 2019 by jfg unable to load picture Quote Link to post Share on other sites
Drewmotty Posted October 9, 2019 Report Share Posted October 9, 2019 2.9mb is still huge. If you don’t have suitable software to reduce the size you can email the photo to yourself and when prompted choose a low resolution. You can then save the received photo and post it to the forum. Quote Link to post Share on other sites
jfg Posted October 9, 2019 Author Report Share Posted October 9, 2019 Quote Link to post Share on other sites
Topoff Posted October 9, 2019 Report Share Posted October 9, 2019 Hi the picture is not obvious but could they be threaded, to take the 4 bolts that hold the radiator support bar? Quote Link to post Share on other sites
jfg Posted October 9, 2019 Author Report Share Posted October 9, 2019 4 minutes ago, Topoff said: Hi the picture is not obvious but could they be threaded, to take the 4 bolts that hold the radiator support bar? i think these are more heavy duty than needed for a rad bar, i think the support bar bolts on underneath the chassis legs Quote Link to post Share on other sites
Melcoagain Posted October 11, 2019 Report Share Posted October 11, 2019 The rimmers site show these with some sort of structure inside the rails but it doesn't seem that anything attaches to them. Could be for manufacturing purposes though it seems like over kill. Quote Link to post Share on other sites
BlueTR3A-5EKT Posted October 12, 2019 Report Share Posted October 12, 2019 Do you have air conditioning? If not - -What about the under frame for the air conditioning radiator to mount on? Just a thought. Peter W Quote Link to post Share on other sites
TR8IAN Posted October 18, 2019 Report Share Posted October 18, 2019 There are all sorts of holes under the front end of the TR7/8 bodyshell - the TR8 radiator bolts up differently to the TR7, other than that some are likely to be for drainage or used for transport during the factor manufacturing processes. Hope this helps. Ian Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.