DOG_MORGAN Posted May 21, 2017 Report Share Posted May 21, 2017 Where is the best place to buy angle drive plus speedo cable for pi tr6 thanks Billy Quote Link to post Share on other sites
TR NIALL Posted May 21, 2017 Report Share Posted May 21, 2017 Billy don't know where's best to Buy from but if you Search the Forum for Angle Drives you'll get loads of Info. Quote Link to post Share on other sites
Mark69 Posted May 21, 2017 Report Share Posted May 21, 2017 As Niall says search forum, I read a while ago a trr member refurbing old units. Quote Link to post Share on other sites
TR NIALL Posted May 21, 2017 Report Share Posted May 21, 2017 AlanT is the Man for Repairing the Angle Drives. Quote Link to post Share on other sites
DOG_MORGAN Posted May 21, 2017 Author Report Share Posted May 21, 2017 Hi Niall have you got any details for mr T thanks Billy Quote Link to post Share on other sites
RogerH Posted May 21, 2017 Report Share Posted May 21, 2017 Hi Billy, send Alan a PM http://www.tr-register.co.uk/forums/index.php?/user/11259-alant/ Roger Quote Link to post Share on other sites
astontr6 Posted May 21, 2017 Report Share Posted May 21, 2017 Hi Dog, If you want an angle drive that works the SI OEM part number is BG2401-05 for a TR6. A UK company makes the full range of SI angle drives and they are called Seedograph Richfield tel: 0115 926 4235. You might not like the price of £95 each The bodies are CNC machined and not zinc alloy die cast and therefore do not look the same. There is no messing about with copper washers as with Moss and other suppliers etc.I know a person who is on his fourth repro zinc alloy one's in just over 12months??? from these usual suppliers. If this one pack up, he is going to S R for one of there's! Bruce Quote Link to post Share on other sites
DOG_MORGAN Posted May 29, 2017 Author Report Share Posted May 29, 2017 Thanks for all your replys just got a quote for the angle drive from speedograh has any one used them before thanks Billy the cost was £125 all in Quote Link to post Share on other sites
cp25616 Posted May 29, 2017 Report Share Posted May 29, 2017 Hi Dog Did you receive my PM? Alan Quote Link to post Share on other sites
astontr6 Posted May 29, 2017 Report Share Posted May 29, 2017 Hi Dog, If you want an angle drive that works the SI OEM part number is BG2401-05 for a TR6. A UK company makes the full range of SI angle drives and they are called Seedograph Richfield tel: 0115 926 4235. You might not like the price of £95 each The bodies are CNC machined and not zinc alloy die cast and therefore do not look the same. There is no messing about with copper washers as with Moss and other suppliers etc.I know a person who is on his fourth repro zinc alloy one's in just over 12months??? from these usual suppliers. If this one pack up, he is going to S R for one of there's! Bruce Here Is an update on the 4th repro angle drive!!!! It failed after only 200+ miles. It is now fair to say don't bother with the zinc alloy repro ones from the usual suppliers! Bruce. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.