ctc77965o Posted October 8, 2016 Report Share Posted October 8, 2016 These 'heritage' throttle bodies just launched...they'll look the part... http://www.performance-car-guide.co.uk/jenvey-dynamics-unveil-revolutionary-new-range-of-heritage-throttle-bodies.html Quote Link to post Share on other sites
john.r.davies Posted October 8, 2016 Report Share Posted October 8, 2016 If I'd converted mine to fuel injection, from carbs or Lucas Pi, I'd be proud of my work. Why are people so afraid of showing what they can do, and hide it, at great cost (31300 according to the link) Because some originality obsessed person will point and say, that's wrong? John Quote Link to post Share on other sites
Motorsport Mickey Posted October 8, 2016 Report Share Posted October 8, 2016 Does 31300 convert to the cost of £840 which I understand is the cost of this system for a 4 cylinder car ? Mick Richards Quote Link to post Share on other sites
john.r.davies Posted October 8, 2016 Report Share Posted October 8, 2016 (edited) Fat fingers - £1300! Yes, £840 x 1.5 John Edited October 8, 2016 by john.r.davies Quote Link to post Share on other sites
stuart Posted October 8, 2016 Report Share Posted October 8, 2016 Looks like a very nice setup to me and comparable in cost to some of the EFI setups I have seen. Stuart. Quote Link to post Share on other sites
TriumphV8 Posted October 8, 2016 Report Share Posted October 8, 2016 There are two reasons to use the Jenveys: First is the look of WEBER DCOE what especially in Germany makes it easy to drive them half road legal and for some people beware the original look of that time where WEBER ruled. Second is that besides the TR6 manifolds for any swap to EFI there is a bit of work requiered to fabricate specific parts, even the TR6 throttle bodies require a minimum of that. Many people can fit parts but few people can manufacture them, especially that they have a professional look when ready. Think of the throttle position sensor that PI does not have. Also the fuel line to feed the injectors is tricky........ These throttle bodies give the WEBER look and provide all parts availiable to fit the EFI right out of the box. The only missing things are the fuel supply to bring fuel with 3bars to the bodies and a DCOE manifold to fit the Jenveys. These manifolds have been fabricated for many engines and they fit 100% to the Jenveys. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.