pfenlon Posted September 11, 2016 Report Share Posted September 11, 2016 Fitting the cut down new floors to get a snug Fit, but noticed the bracket /fabrication with the 2 holes in the corner. What is it for? There isn't one on the other side. Quote Link to post Share on other sites
bob-menhennett Posted September 11, 2016 Report Share Posted September 11, 2016 Mine's a left hooker TR4 but is it the foot operated dipswitch mounting holes ? ( On my car it's set to the left of the pedals ). Bob Quote Link to post Share on other sites
pfenlon Posted September 11, 2016 Author Report Share Posted September 11, 2016 Mine's a left hooker TR4 but is it the foot operated dipswitch mounting holes ? ( On my car it's set to the left of the pedals ). Bob Don't think so Bob, my 6 is a left hand drive car too and the dip switch is in the same place as yours. It would seem to be there to add strength for some reason? but I cannot think of one. Quote Link to post Share on other sites
Mark69 Posted September 11, 2016 Report Share Posted September 11, 2016 Hi Pete, I have the same bracket in my rhd passenger footwell. No idea what its for. Mark. P S it's original rhd not converted. Quote Link to post Share on other sites
Mark69 Posted September 11, 2016 Report Share Posted September 11, 2016 (edited) Too low for switch! Edited September 11, 2016 by Mark69 Quote Link to post Share on other sites
Guest ntc Posted September 11, 2016 Report Share Posted September 11, 2016 Throttle pedal stop.Yes seen one fitted before Quote Link to post Share on other sites
stuart Posted September 11, 2016 Report Share Posted September 11, 2016 Its on all the shells Left and Right hand drive and as Neil says its for a pedal stop on L/hand drive. Stuart Quote Link to post Share on other sites
pfenlon Posted September 11, 2016 Author Report Share Posted September 11, 2016 Throttle pedal stop.Yes seen one fitted before Well now we know, but I still don't see how it would operate??? Is there a stop of some kind missing from the bracket, also I see no threaded holes for the mysterious throttle stop wotsit. Quote Link to post Share on other sites
DaveN Posted September 13, 2016 Report Share Posted September 13, 2016 Would be just a bolt and nut through the bracket.. In fact it's shown in the moss catalogue items 29 and 30. On the RHD the stop bolt is on the pedal itself. Quote Link to post Share on other sites
foster461 Posted September 13, 2016 Report Share Posted September 13, 2016 The hole in Pete's picture is too close to the floor for the accelerator pedal stop. Here's where mine is, the bolt is under the flange on the pedal shaft, pretty high up on the bulkhead. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.