randall977 Posted February 3, 2010 Report Share Posted February 3, 2010 I would like original seats to go with my 1962 TR4 (it currently has 4A seats). I've found these (see attached) for £195 but they will need rebuilding - is this a good price? Quote Link to post Share on other sites
dykins Posted February 3, 2010 Report Share Posted February 3, 2010 Originals are quite rare, so they may be worth a punt. Bearing in mind that to recover them in vinyl yourself are talking around £290 pair, and in leather £420 pair. The internals might need work also. Regards Peter Quote Link to post Share on other sites
dykins Posted February 3, 2010 Report Share Posted February 3, 2010 Sorry, the other thing to mention is that I assume you know that the TR4 had three different styles of seats up until the introduction of the 4A - are these the correct spec for your commission number? Regards Peter Quote Link to post Share on other sites
randall977 Posted February 3, 2010 Author Report Share Posted February 3, 2010 I was thinking about having a go myself... I can do the internals etc - last time I restored a TR4 I took apart the original covers, recut new vinyl and gave it to someone to stitch together - it works pretty well and was very cost effective! I'll see how things go financially - any thoughts on re-chroming? A new rear bumper is over £500, mine looks a bit tired... Quote Link to post Share on other sites
badshead Posted February 3, 2010 Report Share Posted February 3, 2010 I would like original seats to go with my 1962 TR4 (it currently has 4A seats). I've found these (see attached) for £195 but they will need rebuilding - is this a good price? Not sure about the relative values of TR4 -v- TR4 seats, but when I sold a pair of TR4A seats on here last year (sound frames but needed new covers) I got about £40 for them, on that basis £195 sounds a bit steep. Quote Link to post Share on other sites
TR 2100 Posted February 3, 2010 Report Share Posted February 3, 2010 (edited) Not sure about the relative values of TR4 -v- TR4A seats, but when I sold a pair of TR4A seats on here last year (sound frames but needed new covers) I got about £40 for them, on that basis £195 sounds a bit steep. Yes, £195 is rather steep. You should be able to get them for around £100, obviously needing restoration at that price. They are not exactly common so you may have to shop around and be a little patient, maybe even pay a bit more. The Parts Book says the early style of seats continued until approx. CT 15,000 but I have had a couple of TR4s, late 62, up to CT 16,900 and they both had the early style seats. Unless your 4 is very very late '62, the early style seats will be the correct ones. There was then an interim style for a short time before the later style was introduced. The different styles used to be well illustrated in the Moss on-line manual - don't know if it still is, but worth a try. Re-chroming is not cheap and getting more expensive, and more difficult to find a good place, all the time. There's no cheap way, really. You could use a cheap re-chromer but it wouldn't last. The stainless bumpers are supposed to be top quality and a good fit - not cheap but it's a once only expense and low maintenance. I paid top price to have my bumpers re-chromed - supposedly with copper plate and the full works. After two weeks use, occasional rain, there was a lot of spot staining. I think the company will do something about it - don't know what though, it's hardly worth doing the job again, but it just goes to show the problems you can have even when you pay top price. AlanR Edited February 3, 2010 by TR 2100 Quote Link to post Share on other sites
67_gt6 Posted February 3, 2010 Report Share Posted February 3, 2010 The stainless bumpers are supposed to be top quality and a good fit - not cheap but it's a once only expense and low maintenance. http://www.groupharrington.com/bumper/TR4.asp Quote Link to post Share on other sites
Ian Vincent Posted February 3, 2010 Report Share Posted February 3, 2010 My experience of seat pans has been that even when the seat looks superficially OK the internals can have significant fatigue cracking around the front and rear anchor points for the runners and along the back edge of the bottom pan. Not terminal, but a good way to practice your welding skills. £195 sounds a lot, I would want to look at the condition of the metal frames in some detail before I would part with that kind of cash. And if you do go for them, remember that a replacement stuffing kit is expensive and if you can rescue the existing ones it is worth doing so, even if you junk the outer covers. Rgds Ian Quote Link to post Share on other sites
stuart Posted February 3, 2010 Report Share Posted February 3, 2010 My experience of seat pans has been that even when the seat looks superficially OK the internals can have significant fatigue cracking around the front and rear anchor points for the runners and along the back edge of the bottom pan. Not terminal, but a good way to practice your welding skills. £195 sounds a lot, I would want to look at the condition of the metal frames in some detail before I would part with that kind of cash. And if you do go for them, remember that a replacement stuffing kit is expensive and if you can rescue the existing ones it is worth doing so, even if you junk the outer covers. Rgds Ian Not over difficult to repair the seat pans and they are all like it Its the spring bases that are the bits to pay most attention to because nearly all the repros available now are the wrong type of springs and you end up sitting "On" the seat rather than "In" them Stuart. Quote Link to post Share on other sites
randall977 Posted February 3, 2010 Author Report Share Posted February 3, 2010 Thanks for advice. So maybe it might be worth waiting for better / cheaper seats to come up. The chassis number is CT 9649 O so I'm sure it should have the early type seats. The TR4 I restored 15 years ago came with 4A seats which were much thicker but the original seats were there too so I put them back in - I do think they look nicer. On the chrome bumper thing - the bumpers look poor so should I put £1000 into replacing both bumpers and overiders - it's a significant part of the cars look... I didn't realise the new bumpers were stainlesss - that eases the pain a bit! Quote Link to post Share on other sites
67_gt6 Posted February 3, 2010 Report Share Posted February 3, 2010 On the chrome bumper thing - the bumpers look poor so should I put £1000 into replacing both bumpers and overiders - it's a significant part of the cars look... I didn't realise the new bumpers were stainlesss - that eases the pain a bit! As far as I know it is only the supplier in the link I posted that is suplying stainless, other replacements will be chrome. Andy Quote Link to post Share on other sites
randall977 Posted February 3, 2010 Author Report Share Posted February 3, 2010 Just looked at that link - £643 for the whole set with over riders - pretty good! Could I get anything for the old bumpers???? Quote Link to post Share on other sites
Alec Pringle Posted February 3, 2010 Report Share Posted February 3, 2010 £100/pair is quite enough for any seats in poor external and unknown internal condition. The internal condition remains unknown until they've been stripped and eyeballed, and don't let anyone suggest otherwise !! If the outside is shot, then 98% chance the metalwork will need at least some repair . . . and that's being optimistic. But at least the repair isn't rocket science. Old bumpers, if they are straight and sound, have at least some modest value to anyone looking for a good basis for rechroming. Ebay - but be realistic, not over optimistic. Cheers, Alec Quote Link to post Share on other sites
TR 2100 Posted February 3, 2010 Report Share Posted February 3, 2010 Just looked at that link - £643 for the whole set with over riders - pretty good! Could I get anything for the old bumpers???? If they are straight - Yes. Probably not more than £100 though. There are those who prefer originals, but they know well enough the cost of re-chroming, though straightening as well does add to the price (and maybe the unpredictability of the end product). And the stainless bumpers are a very good option. AlanR Quote Link to post Share on other sites
Badfrog Posted February 5, 2010 Report Share Posted February 5, 2010 My TR4 is july '63, CT20649L and had square, straight seats when I bought it. Not these curved ones. Just for the info. Badfrog Quote Link to post Share on other sites
TR 2100 Posted February 5, 2010 Report Share Posted February 5, 2010 My TR4 is july '63, CT20649L and had square, straight seats when I bought it. Not these curved ones. Just for the info. Badfrog That sounds right enough. Were they the 'interim' square seats or the later style? Just the anorak in me being curious. AlanR Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.