Tiger123 Posted May 9 Report Share Posted May 9 Good afternoon need some advice for the correct vacuum pipe for my 66 TR4A any links much appreciated Thanks Quote Link to post Share on other sites
RobH Posted May 9 Report Share Posted May 9 (edited) Push-on fittings both ends, so part 25 + 27 here: ( you already have the part 28) https://www.moss-europe.co.uk/shop-by-model/triumph/tr2-4a/electrical-system/ignition-system/ignition-system-tr2-4a-1953-67.html Edited May 9 by RobH Quote Link to post Share on other sites
BlueTR3A-5EKT Posted May 9 Report Share Posted May 9 Here is the kit for under £4.00 delivered https://www.ebay.co.uk/itm/362789072049?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111451%26meid%3D807c23d41a3d432cbf1a9d8132cce4f0%26pid%3D101196%26rk%3D2%26rkt%3D6%26sd%3D164163158770%26itm%3D362789072049%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bAndUBSourceDemotionWithUltimatelyBoughtOfCoviewV1&_trksid=p4429486.c101196.m2219&itmprp=cksum%3A362789072049807c23d41a3d432cbf1a9d8132cce4f0|enc%3AAQAJAAABIKAGZatwWrSFioKhyF05YYps7xtgOI2Vu0BqB4BERv%2FNTfrUNkP50TZAJfREiGj7R%2BA2x2E5zTqSs43jfR6uCcmt8%2B%2BTUdobg9SfOq%2BIqjUBcv5N54ANig%2FVlPt%2FYP7cGcB%2FyqbPRLUO7jWJZyc4NG7Zt7U7oWr%2FF1arohBE%2B%2BebySssqtvZtSRLdH%2FfUzES0QNEhmx1NUZtcp9fm4tD6bsSLyu8oIAfZem4fPeQT7tGDv1ez77JKolmQP8ZcMnXjn4hJG6%2FkK36UYJlBXbhqatfGn4dUvVwBTihWl1A9y8gAbHglxexw1XvdMpcBY4y1NShKn7UlfE8reXg33hVnyIJq0VswyV6HHPo8qHeLdotqdA3RwHRI08pbrCCYIuiWQ%3D%3D|ampid%3APL_CLK|clp%3A4429486&itmmeta=01HXF1ZQ8NWA3YS66CZB3T00RY OR https://www.ebay.co.uk/itm/164163158770?chn=ps&norover=1&mkevt=1&mkrid=710-153316-527457-8&mkcid=2&itemid=164163158770&targetid=4584757337645565&device=c&mktype=&googleloc=&poi=&campaignid=554427144&mkgroupid=1298524317493059&rlsatarget=pla-4584757337645565&abcId=9313282&merchantid=87779&msclkid=12a0dd8dab941bcb8746bbb15e27a00a Quote Link to post Share on other sites
Tiger123 Posted May 9 Author Report Share Posted May 9 Thank you both much appreciated Quote Link to post Share on other sites
Z320 Posted May 9 Report Share Posted May 9 Hi Tiger, please be sure (and check), the rubber angle will be worn after 1 year. The vacuum unit will than not work anymore. This is why I use short pieces of clear PVC hose, the angled one wrapped with wire to avoid to kink it. If wanted I can ( must make) photos. Ciao, Marco Quote Link to post Share on other sites
Tiger123 Posted May 9 Author Report Share Posted May 9 Thank you intend to replace all of the vacuum pipe and fittings Quote Link to post Share on other sites
Tr4aJim Posted May 9 Report Share Posted May 9 I just used some 1/4 inch (od) copper tubing for the line and two small pieces of rubber tube at each end. The soft copper can be bent easily to any shape needed. Jim Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.