phil Dean Posted February 21 Report Share Posted February 21 Is there ant technical reason why I can't turn the rocker box round by 180 Degrees. I know the oil breather tube is on the left looking back from the front of the car but my car is not fitted with Emission Control valve. In fact the take of on the manifold for this is now used for the vacuum to the servo. The reason I wish to turn the rocker box round I want to fit a oil catch tank and the best place I can find without it being in the way of something else is on the bulk head next to the the right hand side of the battery looking from the front back. The only reason I can think of at the moment the rocker box to the block is about the only place that doesn't leak on that engine. Phil Quote Link to post Share on other sites
james christie Posted February 21 Report Share Posted February 21 I have one of these rocker box covers, acquired last year from Stuart. Like any self respecting Sidescreen man, I tried to fit it with the filler at the front. No way! So much to my disappointment it sits t’other way round like yours. james Quote Link to post Share on other sites
stuart Posted February 21 Report Share Posted February 21 It wont go the other way round as the studs holding it down are offset. Stuart. Quote Link to post Share on other sites
phil Dean Posted February 21 Author Report Share Posted February 21 Ok thanks that answers that one. Rethink time. Thanks for your input Phil Quote Link to post Share on other sites
harrytr5 Posted February 24 Report Share Posted February 24 Can you not just drill a hole where you want it and bolt a fitting with a suitable ribbed tail on it. That what I did on mine (TR5) Regards Harry Quote Link to post Share on other sites
monty Posted February 25 Report Share Posted February 25 Mine works fine like this Phil. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.