Phil H 4 Posted January 14 Report Share Posted January 14 I’m in the process of refurbishing my hardtop and wonder if anyone can advise on the location and orientation of the side rubber seals, which I think are just adhered. Are they fitter cab side or outer edge and which way is the chamfer. Couple of picture hopefully to make things cleared. Many thanks Phil Quote Link to post Share on other sites
Waldi Posted January 14 Report Share Posted January 14 (edited) Hi Phil, this picture is before I reconditioned mine, I can’t guarantee it was original after 50 years though. The lip was on the cabin side. Waldi Edited January 14 by Waldi Quote Link to post Share on other sites
heckler Posted January 14 Report Share Posted January 14 See your duplicate post for info. Chris Quote Link to post Share on other sites
Phil H 4 Posted January 15 Author Report Share Posted January 15 Thanks Waldi but I think the picture you have sent is of the rear seal not the side seal. Chris just having a look. Ta Phil Quote Link to post Share on other sites
Waldi Posted January 18 Report Share Posted January 18 On 1/15/2024 at 5:04 PM, Phil H 4 said: Thanks Waldi but I think the picture you have sent is of the rear seal not the side seal. Chris just having a look. Ta Phil Sorry Chris, you are right. I do not have a picture of the side seals, and the HT is on the car. Cheers, Waldi Quote Link to post Share on other sites
Kevo_6 Posted January 18 Report Share Posted January 18 I don’t know if this may help, hopefully it will. TR6 Hardtop factory instructions.pdf Quote Link to post Share on other sites
Phil H 4 Posted January 19 Author Report Share Posted January 19 Thanks Kev, Always useful to put in the file. Phil Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.