had17462 Posted September 19, 2023 Report Share Posted September 19, 2023 Hi all , found these in the garage today can i ask are the steels rings for the bearings ? regards Nick. Quote Link to post Share on other sites
John Morrison Posted September 20, 2023 Report Share Posted September 20, 2023 No, they are spacers, have you got everything else for the conversion? Hub, shims and mine came with sealed for life Timken bearings. John. Quote Link to post Share on other sites
had17462 Posted September 20, 2023 Author Report Share Posted September 20, 2023 Hi John I have the hubs but nothing else as I can see ,so the spacers need to be on the axle with the alloy hub ,I can’t remember from whom I bought them from I think it was a young guy just starting out on his own at stoneleigh. regards Nick. Quote Link to post Share on other sites
Motorsport Mickey Posted September 20, 2023 Report Share Posted September 20, 2023 Shack tune make those, anti pad knock back spacer kit Mick Richards Quote Link to post Share on other sites
John Morrison Posted September 20, 2023 Report Share Posted September 20, 2023 If there is no urgency, I’m away until after the weekend I’ll pull one of mine and get you all the info It definitely runs 4 all the same size sealed bearing s John Quote Link to post Share on other sites
Motorsport Mickey Posted September 20, 2023 Report Share Posted September 20, 2023 Nick, PM message for you. Mick Richards Quote Link to post Share on other sites
stuart Posted September 21, 2023 Report Share Posted September 21, 2023 Nick I have a set of bearings and nothing else if thats any help Stuart. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.