Rod Mac Posted August 24, 2023 Report Share Posted August 24, 2023 Hi all I've come to refit the fly-off handbrake to my restored bodyshell and after much headscratching have realised that my new floorpan has no aperture for the lever to stick through. I assume these panels were no longer available. I'll need to cut the hole and have a gaiter which gives me a rough idea of size. My problem is getting the hole in the right place. Does anyone have a picture of a floorpan with hole? Even a pic with handbrake fitted to give me a rough idea. Thanks, Rod Quote Link to post Share on other sites
Lebro Posted August 24, 2023 Report Share Posted August 24, 2023 Maybe you have got a 4A floor pan, where the handbrake was on the tunnel ? Bob Quote Link to post Share on other sites
stuart Posted August 24, 2023 Report Share Posted August 24, 2023 13 minutes ago, Lebro said: Maybe you have got a 4A floor pan, where the handbrake was on the tunnel ? Bob All the current available floor pans are 4a on Im afraid. your going to have to hope the old pans give you the location of the hole.Or if anyone has one in build can get some measurements. Stuart. Quote Link to post Share on other sites
MKTR Posted August 24, 2023 Report Share Posted August 24, 2023 Maybe some help - forum linkhttps://www.tr-register.co.uk/forums/index.php?/topic/33429-handbrake-hole-for-a-tr4/ Mark Quote Link to post Share on other sites
Rod Mac Posted August 24, 2023 Author Report Share Posted August 24, 2023 15 minutes ago, MKTR said: Maybe some help - forum linkhttps://www.tr-register.co.uk/forums/index.php?/topic/33429-handbrake-hole-for-a-tr4/ Mark Thanks Mark, I searched but missed that old post. Looks just the job in pics 2 and 4 and I'm sure the new gaiter will act as a template. Many thanks Rod Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.