roy53 Posted July 29, 2023 Report Share Posted July 29, 2023 I have been trying for weeks to stop leaking on the 2 pipes from the reservoir 2 pipes 505062. Has anyone had success with the tight bends on these or advice on how to obtain these ? Roy Quote Link to post Share on other sites
ntc Posted July 29, 2023 Report Share Posted July 29, 2023 1 hour ago, roy53 said: I have been trying for weeks to stop leaking on the 2 pipes from the reservoir 2 pipes 505062. Has anyone had success with the tight bends on these or advice on how to obtain these ? Roy Roy The best way I found was to use a inner speedo cable to get the bends Quote Link to post Share on other sites
Ian Vincent Posted July 29, 2023 Report Share Posted July 29, 2023 I filled the pipes with sand before I bent them. Rgds Ian Quote Link to post Share on other sites
Lebro Posted July 29, 2023 Report Share Posted July 29, 2023 +1 for speedo cable, also anneal the pipe before bending. Bob Quote Link to post Share on other sites
Ralph Whitaker Posted July 31, 2023 Report Share Posted July 31, 2023 On 7/29/2023 at 6:39 PM, roy53 said: I have been trying for weeks to stop leaking on the 2 pipes from the reservoir 2 pipes 505062. Has anyone had success with the tight bends on these or advice on how to obtain these ? Roy I gave up and cut the pipes and joined them with rubber fuel pipe. They are under no pressure. Not original I know, but despite having the original steel pipes I just could not get them to line up correctly. Ralph Quote Link to post Share on other sites
roy53 Posted September 15, 2023 Author Report Share Posted September 15, 2023 Spot on advice, the speedo cable worked a treat. Thanks Roy Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.