Richard71 Posted February 2, 2023 Report Share Posted February 2, 2023 I'll be removing the fuel tank from my TR6, while it's out I might as well change the filler neck hose and the sender unit gasket for E10 proof viton rubber. Does anyone know of a single source for both these items? Richard. Quote Link to post Share on other sites
Waldi Posted February 2, 2023 Report Share Posted February 2, 2023 Revington sell a good quality filler neck hose, not sure about the sender gasket, maybe they have a viton one for that as well? Waldi Quote Link to post Share on other sites
Lebro Posted February 2, 2023 Report Share Posted February 2, 2023 Cork works well. Bob Quote Link to post Share on other sites
Richard71 Posted February 2, 2023 Author Report Share Posted February 2, 2023 Thanks Waldi & Bob, I've ordered the hose from Revington, the cork gasket can stay where it is. Quote Link to post Share on other sites
John L Posted February 3, 2023 Report Share Posted February 3, 2023 Moss do one, https://www.moss-europe.co.uk/gasket-set-fuel-sender-ethanol-proof-293-401.html?assoc=591152 Not sure where the oblong one goes though. I have one ready to fit but not done yet. John Quote Link to post Share on other sites
Andy Moltu Posted February 3, 2023 Report Share Posted February 3, 2023 Rumour has it cork works well with ethanol. However rumour has it the wine making industry is looking at Viton as a performance upgrade. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.