John Morrison Posted October 11, 2022 Report Share Posted October 11, 2022 Working through wiring this TR 6 we’re involved with one issue is that the wipers work on first speed but stop on second Have we got the wires at the switch wrong and can anybody confirm correct sequence cheers John Quote Link to post Share on other sites
RogerH Posted October 11, 2022 Report Share Posted October 11, 2022 Hi John, have you had a look here http://www.advanceautowire.com/tr2506.pdf I don;t know if the colours are the correct sequence. Roger Quote Link to post Share on other sites
cp25616 Posted October 11, 2022 Report Share Posted October 11, 2022 John from the top it is, Blue/Light green Green Red/Light green Brown/light green. Switch fully in at the top (sticks out at the bottom a bit) is off. Switch sitting normally (level that is) is normal speed. Switch pressed down is twin speed. Alan G Quote Link to post Share on other sites
RobRennie Posted October 11, 2022 Report Share Posted October 11, 2022 +1 for Alan, did mine over weekend. Quote Link to post Share on other sites
stuart Posted October 11, 2022 Report Share Posted October 11, 2022 Like this Stuart Quote Link to post Share on other sites
John Morrison Posted October 12, 2022 Author Report Share Posted October 12, 2022 Magic guys thanks John Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.