Corkery11 Posted May 29, 2022 Report Share Posted May 29, 2022 Hi, I've found the forum invaluable for information over the last year or two as I am trying to get what has amounted to fresh air, rust and parts into some semblance of a Tr3. However I am now onto the mechanical parts and am stumped regarding the attached picture. These were among the boxes of bits n bobs. Anyone got any idea where they fit? Ta Mark Quote Link to post Share on other sites
stuart Posted May 29, 2022 Report Share Posted May 29, 2022 Either side of the engine mountings or the gear box mounting, theyre used as stabilisers , there are two types with the engine ones being slightly bigger. Stuart. Quote Link to post Share on other sites
AJ2014 Posted May 29, 2022 Report Share Posted May 29, 2022 (edited) Engine mount steady bracket? two each side (total 4) Part 72 in pics. You beat me to it Stuart ;-) Regards Ade Edited May 29, 2022 by AJ2014 Quote Link to post Share on other sites
Corkery11 Posted May 29, 2022 Author Report Share Posted May 29, 2022 Thanks for that!! I've been wading through parts diagrams of suspension and steering as they were in that "bucket" of bits. Think it would have taken forever to eventually spot them so thanks again to you both. Quote Link to post Share on other sites
BlueTR3A-5EKT Posted May 29, 2022 Report Share Posted May 29, 2022 They are worth fitting to stop oil soaked engine mounts allowing the engine to move forward under heavy braking with the consequence of the fan impinging on the radiator core. Quote Link to post Share on other sites
ianc Posted May 29, 2022 Report Share Posted May 29, 2022 Thanks for the explanation Peter, I was wondering what these brackets did. Ian Cornish Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.