Stephen H Posted August 25, 2021 Report Share Posted August 25, 2021 Hi. I've switched my car to some lever shocks as I've never been overly happy with the ride from the Spax adjustable shocks that where fitted when I bought the car. So I've some spare shocks and mounting brackets. I picked up some cheap lever shocks to see how the car would ride on lever shocks and I do prefer it. Ideally I'd like to swap the Spax and mounting brackets for some good used lever shocks ie ones good and ready to use with no leaks. The lever shocks I picked up to test weep a little so looking for a better pair to use permanently. The mounting brackets are the type that mount to the original lever shock mounting points and also to the chassis where the bump stop mounts. I might consider selling them if no one wants to swap. Thanks Stephen Link to post Share on other sites
harrytr5 Posted August 26, 2021 Report Share Posted August 26, 2021 I do not know if Stevenson are still trading but they do a good rebuild on original Armstrong lever arms. Replace the short mounting bolts with 2" and nylock the rear thread protruding so they will not come loose. Works for me. Regards Harry Link to post Share on other sites
Stephen H Posted August 26, 2021 Author Report Share Posted August 26, 2021 Hi Harry Thanks I might get them rebuilt over the winter if I can't swap my old stuff for a better set. And I'll take your advice on the mounting bolts. Link to post Share on other sites
rcreweread Posted August 26, 2021 Report Share Posted August 26, 2021 Stephen - I have some spare lever arms rebuilt by Stevsons which I can let you have on an exchange basis - they are 15% uprated as standard now. However I don't want the telescopic conversion - if of interest, PM me your contact details and we can discuss Cheers Rich Link to post Share on other sites
Stephen H Posted August 26, 2021 Author Report Share Posted August 26, 2021 37 minutes ago, rcreweread said: Stephen - I have some spare lever arms rebuilt by Stevsons which I can let you have on an exchange basis - they are 15% uprated as standard now. However I don't want the telescopic conversion - if of interest, PM me your contact details and we can discuss Cheers Rich Hi Rich Thanks I've sent you a PM Cheers Stephen Link to post Share on other sites
jimcwestie Posted August 26, 2021 Report Share Posted August 26, 2021 https://www.vandcengineering.co.uk/ This the company I got my rear dampers from. Jim Link to post Share on other sites
phil3uh Posted September 11, 2021 Report Share Posted September 11, 2021 Hi Stephen, I dont have any lever arms to swap but am interested in your brackets so if you want you sell them kindly get in touch. cheers Phil Link to post Share on other sites
Stephen H Posted September 11, 2021 Author Report Share Posted September 11, 2021 32 minutes ago, phil3uh said: Hi Stephen, I dont have any lever arms to swap but am interested in your brackets so if you want you sell them kindly get in touch. cheers Phil Hi Phil Sorry they sold today on eBay. Regards Stephen Link to post Share on other sites
Recommended Posts