Paulfc Posted September 19, 2020 Report Share Posted September 19, 2020 Hi, My fast idle cam does not have a return spring on it. I’ve bought a spring but looking at the Rimmer catalogue it appears the spring should have an extension link on it. Can anyone please tell me where the non-spring end of the extension link should be attached to so I can make one as it’s now NLA to purchase. Thanks Quote Link to post Share on other sites
John L Posted September 19, 2020 Report Share Posted September 19, 2020 Its fitted to a hole in the top of r/h engine mount, I have made a piece of stiff wire from the spring end to the hole in the bracket. Hope that helps John Quote Link to post Share on other sites
Paulfc Posted September 19, 2020 Author Report Share Posted September 19, 2020 Thank you, John. Quote Link to post Share on other sites
Waldi Posted September 19, 2020 Report Share Posted September 19, 2020 I did as John, works ok. Waldi Quote Link to post Share on other sites
Paulfc Posted September 22, 2020 Author Report Share Posted September 22, 2020 Thanks guys. Job done, tested and all ok. Paul Quote Link to post Share on other sites
Robert Price Posted September 24, 2020 Report Share Posted September 24, 2020 I found the local bike shop usefull for this as you can buy a stainless steel spoke bend a hook at each end perfect. Rob Quote Link to post Share on other sites
JohnC Posted September 24, 2020 Report Share Posted September 24, 2020 1 hour ago, Robert Price said: I found the local bike shop usefull for this as you can buy a stainless steel spoke bend a hook at each end perfect. or, dare I suggest, a coat hanger... Quote Link to post Share on other sites
Paulfc Posted September 24, 2020 Author Report Share Posted September 24, 2020 ...... which worked for me! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.