YOW500 Posted September 14, 2020 Report Share Posted September 14, 2020 Hi everyone. Please see below a picture of my sectioned Triumph TR gear box. The gear box used was very badly damaged, incomplete, and unusable in a car. My thanks to Pete and Tom Coxs for helping me with the project. Some details are still to be added, but the box does rotate, and change gear. Very clear for all to see. I am looking to do a similar thing with the over drive part of the box. If you have an over drive box which is badly damaged but complete, and most of all, never likely to be run again, and you think it is suitable to be sectioned please get in touch with me. I would be happy to pay postage, a small cost, or a donation to charity. Thank you Russell Link to post Share on other sites
Lebro Posted September 15, 2020 Report Share Posted September 15, 2020 What an interesting thing to do, looking forward to seeing a sectioned 4 pot engine ! Bob. Link to post Share on other sites
YOW500 Posted September 15, 2020 Author Report Share Posted September 15, 2020 Thanks Bob, not sure my band saw throat is big enough !!!! Russell Link to post Share on other sites
AndyR100 Posted September 15, 2020 Report Share Posted September 15, 2020 i saw the finished item a little earlier on the Cox's Facebook pages - looks good! .... Andy P.S. can't help with the OD i'm afraid Link to post Share on other sites
david ferry Posted September 15, 2020 Report Share Posted September 15, 2020 I've the perfect block if you'd like to have a go! I may also be able to supply a section of cylinder head, pistons and a crank too...…. David Link to post Share on other sites
Recommended Posts