Matt1969 Posted July 19, 2020 Report Share Posted July 19, 2020 Hi, the injector retaining plate bolt has stripped the threads in the inlet manifold. Is there a workaround for this, eg some sort of oversized insert? Thanks. M Quote Link to post Share on other sites
Steves_TR6 Posted July 19, 2020 Report Share Posted July 19, 2020 A helicoil would fix that or even fill with Quicksteel and redril/tap should be good enough. Quote Link to post Share on other sites
Matt1969 Posted July 19, 2020 Author Report Share Posted July 19, 2020 Thanks! Quote Link to post Share on other sites
stuart Posted July 19, 2020 Report Share Posted July 19, 2020 Helicoil would be favourite. Stuart. Quote Link to post Share on other sites
DaveN Posted July 21, 2020 Report Share Posted July 21, 2020 Short term ... discard the washer if there is one fitted! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.