kittysoman2013 Posted May 24, 2020 Report Share Posted May 24, 2020 Am looking for some 4mm domed, countersunk phillips head screws. I have searched the net without success, are these NOT available now? Quote Link to post Share on other sites
RobH Posted May 24, 2020 Report Share Posted May 24, 2020 (edited) These? https://www.accu.co.uk/en/724-raised-phillips-countersunk-screws Edited May 24, 2020 by RobH Quote Link to post Share on other sites
ed_h Posted May 24, 2020 Report Share Posted May 24, 2020 Also called oval head, at least in the U.S. Ed Quote Link to post Share on other sites
Drewmotty Posted May 25, 2020 Report Share Posted May 25, 2020 Are they really M4? Surely there won’t be any M4 screws on a TR. Quote Link to post Share on other sites
RogerH Posted May 25, 2020 Report Share Posted May 25, 2020 8/32unf on the door interior pull handle is also domed and very similar to M4. Roger Quote Link to post Share on other sites
Tony_C Posted May 25, 2020 Report Share Posted May 25, 2020 Hello Kitty, welcome to the Forum.... Is this possibly a reference to the chap over in your part of the world who let himself into the kitchen of Mc Donalds and did something inappropriate with the serving staff and then ran off?.... It was reported over here as: “Nut screws Washer and bolts.....” Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.