Jump to content

TR4A SU Oversize Spindle Bores


Recommended Posts

I want to fit oversize spindles to my SU's but can't find a reasonably priced reamer. Does anyone know where I might get one.

Thanks

Alan.

Link to post
Share on other sites

Hi Alan,

 

do you actually need the over size spindles. When I took mine apart I found that the bores had a quite hard bush already fitted.

The spindles were badly worn but not the bushed bores

 

If you do need a reamer try TRacy Tools in Devon     https://www.tracytools.com/

 

Roger

Link to post
Share on other sites

As Roger has written often the wear is on the old spindle and not in the body bush.   Take the old spindles out and test the body bush size with the shank of a drill. That will guide you to the size of spindle required.  
A standard sized spindle is......By imperial micrometer  0.311”   By my metric very-near 7.91 mm     So that’s 5/16” then.  Try a 5/16” drill shank in the carb body and see how much it wobbles before committing to spindles.

Cheers

Peter W

Link to post
Share on other sites

As Roger has found above; I’ve rebuilt many sets of SUs H4,H6 and HS6 but I’ve never had to replace the bushes as all the wear usually occurs on the spindle. Try an unworn section of your spindle in the bush to see if it really needs bushes. 
Edit: looks like Peter can type faster than I can :-)

Edited by Drewmotty
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.