pfenlon Posted October 7, 2016 Report Share Posted October 7, 2016 How have you made the acc pedal work when changing from Left to Right hand drive. I aim keeping the Clutch pedal and master as per LHD TR6 can it be done mechanically by rod, or is a cable preferable. any ideas are welcome. Quote Link to post Share on other sites
Ian Vincent Posted October 7, 2016 Report Share Posted October 7, 2016 On my 3a I did it with a rod linkage. The pedal rod runs along the firewall with a big dog leg around the front of the brake and clutch pedals. It's broadly the same in the 4 as far as I am aware. It goes through the firewall on the opposite side of the gearbox tunnel to the LHD version. I'm not at home at the moment otherwise I'd post a picture. Rgds Ian Quote Link to post Share on other sites
BlueTR3A-5EKT Posted October 7, 2016 Report Share Posted October 7, 2016 How have you made the acc pedal work when changing from Left to Right hand drive. I aim keeping the Clutch pedal and master as per LHD TR6 can it be done mechanically by rod, or is a cable preferable. any ideas are welcome. Have you asked TR Bitz as they did a whole host of LHD to RHD conversions. http://www.trbitz.com Are you PI or Carb? Peter W Quote Link to post Share on other sites
pfenlon Posted October 7, 2016 Author Report Share Posted October 7, 2016 (edited) Have you asked TR Bitz as they did a whole host of LHD to RHD conversions. http://www.trbitz.com Are you PI or Carb? Peter W Carb Peter, they "Bitz" can do it other ways, by using a TR4 pedal and another clutch slave housing on top of the fab holding the pedal box. But I wondered if there were any new ideas within the forum. Edited October 8, 2016 by pfenlon Quote Link to post Share on other sites
graeme Posted October 8, 2016 Report Share Posted October 8, 2016 (edited) Hi Pete, On my TR250 (same as a carb TR6) I intend to use a TR5 throttle pedal and then fitting the linkage from the 250 for the carbs. I don't see a problem with this setup although I haven't proven it yet. Cheers Graeme Edited October 8, 2016 by graeme Quote Link to post Share on other sites
pfenlon Posted October 8, 2016 Author Report Share Posted October 8, 2016 Hi Pete, On my TR250 (same as a carb TR6) I intend to use a TR5 throttle pedal and then fitting the linkage from the 250 for the carbs. I don't see a problem with this setup although I haven't proven it yet. Cheers Graeme Have you any pics pls Graeme? Pete. Quote Link to post Share on other sites
graeme Posted October 9, 2016 Report Share Posted October 9, 2016 Have you any pics pls Graeme? Pete. Hi Pete, Not easy to photograph black on black but I hope this gives an idea of what I am doing. Let me know if you require any more detail. Cheers Graeme Quote Link to post Share on other sites
pfenlon Posted October 9, 2016 Author Report Share Posted October 9, 2016 Hi Pete, Not easy to photograph black on black but I hope this gives an idea of what I am doing. Let me know if you require any more detail. TR250_009-2048.jpg Cheers Graeme Thanks for the pic thats just the job I will try for that one Pete Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.