Alanretired Posted October 15, 2015 Report Share Posted October 15, 2015 Hi all I am currently rebuilding a 1958 Tr 3a and on reassembling the front suspension have found that the driver side rear lower wishbone arm is damaged beyond repair. My damaged part has ident number 1L 05112 1B cast in the arm. I am therefore looking for a replacement part in good condition i.e. eyes not oval. Thanks Alan Quote Link to post Share on other sites
Tom Boyd Posted October 15, 2015 Report Share Posted October 15, 2015 Try TR Bitz at Warrington or Walter Petchey Tom Quote Link to post Share on other sites
stuart Posted October 16, 2015 Report Share Posted October 16, 2015 You can re-bush them to combat ovality, Revingtons used to offer that as a service. Stuart. Quote Link to post Share on other sites
BlueTR3A-5EKT Posted October 16, 2015 Report Share Posted October 16, 2015 TRY http://www.revingtontr.com/shop/product_display.asp?mscssid=4AK8JNTU52FG8JRT9L1MHTP1EHBJFFME&ProductID=106578EX I can only help with the 106577 (RH front - LH rear) Cheers Peter W Quote Link to post Share on other sites
Alanretired Posted October 16, 2015 Author Report Share Posted October 16, 2015 Hi all Thanks for your helpful comments. I will follow up on the leads. Regards Alan Quote Link to post Share on other sites
Alan Young Posted October 16, 2015 Report Share Posted October 16, 2015 I have two One marked 1L05112 One " 16112 If that helps Alan Quote Link to post Share on other sites
Alan Young Posted October 16, 2015 Report Share Posted October 16, 2015 Both are new The 15112 is followed By DN3 I think its a N Alan Quote Link to post Share on other sites
Alanretired Posted October 16, 2015 Author Report Share Posted October 16, 2015 Hi Alan PM sent Thanks Alan Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.