88V8 Posted November 2, 2010 Report Share Posted November 2, 2010 Some home-brewed features on a well-used TR4 owned by a member who is too modest to post about his unusual mods. Starting with an individual take on the theme of 'emergency bonnet release', which continues out of the rad grille over the next two pics. And of course the stainless cover for the master cylinders. Here's a stainless mount for the CB aerial Here's an actuator for the electric windows. He did tell me where the windey bits came from but errrrmmm Nice bit of underbonnet storage The door latch.... that puts grease on your sleeve.... here's a stainless cover that automatically slides over the latch, complete with the finger wot made it Ingeneous mount for the radio aerial And the tour de force - hand-made vent cover beaten out of stainless Coming up - hydraulic buffer mounts for the rear bumper... Ivor Quote Link to post Share on other sites
dykins Posted November 3, 2010 Report Share Posted November 3, 2010 I think I recognise that car! It has an extremely appropriate registration, doesn't it? Regards Peter Quote Link to post Share on other sites
North London Mike Posted November 3, 2010 Report Share Posted November 3, 2010 .............so do I, nice car, modest owner, nice chap. I'm currently nicking all the good ideas ! Ivor, you forgot the Alternator heat shield, 2nd photo, currently on my work bench waiting to be fitted Everytime I take LNK out I promise to fit it BUT, when I come home the exhaust is always hot, bugger !! Quote Link to post Share on other sites
badshead Posted November 3, 2010 Report Share Posted November 3, 2010 That emergency bonnet release is err....an engineering marvel! Quote Link to post Share on other sites
jellison Posted November 3, 2010 Report Share Posted November 3, 2010 Yank car? Not RHD. Bonnet release a good idea, but the cover for the door catch!! CB radio, chrome air vent, YUK. Quote Link to post Share on other sites
Bremer Posted November 3, 2010 Report Share Posted November 3, 2010 Some good ideas. The misalignment between the thermostat cover and the rad inlet spoils the picture a little bit, though. Quote Link to post Share on other sites
graeme Posted November 5, 2010 Report Share Posted November 5, 2010 Yank car? Not RHD. Are you looking at the photos through a mirror??? It is definately RHD. Graeme Quote Link to post Share on other sites
Badfrog Posted November 21, 2010 Report Share Posted November 21, 2010 Hi all, A nifty solution to organize every bit lying around in the TR: the very large door pocket. Badfrog Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.