Jump to content

TR4 Radiator Cowl


Recommended Posts

The radiator on my TR4 measures 14 inches wide but the radiator cowl fits a radiator that is 17 inches wide.

 

Do I have the wrong radiator or wrong cowl? What should the dimensions of the radiator be?

 

Sound as if you have the cowl from a 4a.Different rad altogether, shorter and wider.

Stuart.

Link to post
Share on other sites

Sound as if you have the cowl from a 4a. Different rad altogether, shorter and wider.

Stuart.

 

 

Could be, but the TR4 cowl, as original, was a couple of inches wider

than the radiator.

 

Maybe it's one of the repro parts that was made exactly as original?

 

AlanR

Link to post
Share on other sites

Could be, but the TR4 cowl, as original, was a couple of inches wider

than the radiator.

 

 

Perhaps to allow some cold air to the carbs?

 

Maybe it's one of the repro parts that was made exactly as original?

 

 

Touch of irony? wink.gif

Link to post
Share on other sites

The same shroud (850435) is used on both TR4 and TR4A - the latter has the wider radiator, to which the shroud fits. See my article in Section B18 of the Technicalities CD for suggestions on methods of improving the cooling arrangements on the TR4, including the blocking of that gap between the shroud and the radiator down each side of the radiator.

 

Ian Cornish

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.