Tony Plum Posted April 20 Report Share Posted April 20 Hi Been starting the TR6 monthly over the winter period. Gone to use today and clutch seems to have ceased (going straight to floor). Any help or suggestions please? We are new to classics (our first year) should I have done anything else during the winter months? Thanks in advance Quote Link to post Share on other sites
Steve 286 Posted April 20 Report Share Posted April 20 Is there any fluid in the master cylinder that is the first thing I would check Quote Link to post Share on other sites
RogerH Posted April 20 Report Share Posted April 20 Hi Tony welcome to the forum, any puddles (leaks) under the car or in the engine bay near the master cylinder. Roger Quote Link to post Share on other sites
Z320 Posted April 20 Report Share Posted April 20 On the carpet? Quote Link to post Share on other sites
PodOne Posted April 20 Report Share Posted April 20 Hi Tony Have a look at the clutch slave cylinder beneath the car just behind the oil filter most likely the seals have failed and lost its fluid. Andy Quote Link to post Share on other sites
Tony Plum Posted April 21 Author Report Share Posted April 21 Thanks everyone will look at those suggestions above. Quote Link to post Share on other sites
Richmac Posted April 23 Report Share Posted April 23 This happened to me and ended up getting the clutch slave cylinder rebuilt. Never did find the fluid but I have carpet on the floor. Please quickly clean any fluid of the paint work if you see any Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.