AarhusTr6 Posted March 17 Report Share Posted March 17 Hi chaps I have a 1970 CC with 74 engine and would love OD. I saw this add on FB and wondered if any of you know if this could fit or what more questions I should ask ?? https://www.facebook.com/groups/tr6marketplace/permalink/1309883456303036/ If you can’t access this I can screenshot more details Quote Link to post Share on other sites
harrytr5 Posted March 17 Report Share Posted March 17 Yes it should fit. The prop shaft is the same length with or without the overdrive. Tom Cox will build you one of course. Address and phone number inside back page or Traction mag. Regards Harry Quote Link to post Share on other sites
BlueTR3A-5EKT Posted March 17 Report Share Posted March 17 That looks like an A type overdrive for a TR and should fit your 1970 CC chassis without modifications. You will need the electrical circuit, a control switch relay and cables. It looks like the isolator switched on the gearbox remote are present. Check it has a switch for the reversing lights. As Harry says get it looked at before installing. Could be tears if you get it installed only to find the lay gear bearings have worn through. Quote Link to post Share on other sites
stuart Posted March 17 Report Share Posted March 17 Listed last July are you sure its still for sale? Bit of a hike to pick it up too. Stuart. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.