brenda Posted October 18, 2023 Report Share Posted October 18, 2023 We had a lovely day a Bamburgh then it was time to leave, start TR and would not run misfiring badly. Lift bonnet look round, check points ok, replace plugs for new no difference. Just about to check petrol and spotted the pipe from servo to inlet manifold, it’s totally perished kept cutting back and kept splitting, good job i carry spare rubber pipe in the boot. Replace and runs fine. Having a close look the 2 pipes on the heater supply & return have ballooned in between the jubilee clips, all hoses have only been on since engine rebuild in 2020 looks like I need to replace all when we get back home. Mike Redrose Group Quote Link to post Share on other sites
RogerH Posted October 18, 2023 Report Share Posted October 18, 2023 Hi Mike, also check the two small heater pipes on the rear of the bulkhead above your left foot. If these pop you lose control of the pedals. Roger Quote Link to post Share on other sites
stuart Posted October 18, 2023 Report Share Posted October 18, 2023 Replace with proper re-enforced pipes as there’s a lot about that aren’t Stuart Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.