cvtrian Posted October 4, 2023 Report Share Posted October 4, 2023 Hi everyone the SDF have a number of these filler necks surplus to requirements, left over from the double thermostat housing project for early cars. They were also fitted to early Vanguard header tanks, but does anyone know of any other make/model applications where they may prove useful? Thanks Ian Quote Link to post Share on other sites
BlueTR3A-5EKT Posted October 4, 2023 Report Share Posted October 4, 2023 (edited) Jaguar used it on the XJ6 They were my source for the occasional TR2 some 35 years ago. Gasket was the bigger seller, again from Jag. Edited October 4, 2023 by BlueTR3A-5EKT Quote Link to post Share on other sites
RAHTR4 Posted October 4, 2023 Report Share Posted October 4, 2023 Hi Ian, You have a P.M. Regards Richard Quote Link to post Share on other sites
cvtrian Posted October 4, 2023 Author Report Share Posted October 4, 2023 3 hours ago, BlueTR3A-5EKT said: Jaguar used it on the XJ6 They were my source for the occasional TR2 some 35 years ago. Gasket was the bigger seller, again from Jag. Thanks Pete, interesting prices for the XJ6 item at between £31+VAT (Martin Robey) and £75 each depending on supplier. The XJ6 item has two outlets in the neck? Ian Quote Link to post Share on other sites
stuart Posted October 4, 2023 Report Share Posted October 4, 2023 1 hour ago, cvtrian said: Thanks Pete, interesting prices for the XJ6 item at between £31+VAT (Martin Robey) and £75 each depending on supplier. The XJ6 item has two outlets in the neck? Ian Yes one to the header tank and one back into the rad. Stuart. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.