Richard71 Posted August 17, 2023 Report Share Posted August 17, 2023 Does anyone happen to have a photo of their installed Phoenix Big Bore system? I have the extractor manifold and twin pipe & silencer system, but I've now opted to swop out the twin for the single pipe system. With the manifold fixed to the cyl head I can't seem to figure out how the system goes together. No matter which contortion or pipe (2 x link pipes) configuration I attempt, it just won't fit, it fouls on the chassis, the gearbox mount, everything. Richard. Quote Link to post Share on other sites
iani Posted August 18, 2023 Report Share Posted August 18, 2023 No pics unfortunately as I have sold my TR6, I had this system fitted however without any difficulty though so something must be wrong. Quote Link to post Share on other sites
Nigel A Posted August 18, 2023 Report Share Posted August 18, 2023 These may help, wish everything was this clean now!!! Nigel Quote Link to post Share on other sites
Richard71 Posted August 18, 2023 Author Report Share Posted August 18, 2023 Thanks for the photos Nigel, impressive restoration work you done there, well done. I spoke to the supplier, refitted the forward link pipe and it would appear it was poorly bent, see pics. Quote Link to post Share on other sites
TRTOM2498PI Posted August 18, 2023 Report Share Posted August 18, 2023 Thank goodness you only have a 2.25" system to fit, you should try a 3" system Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.