Brian Eldred Posted July 22, 2023 Report Share Posted July 22, 2023 A few bits, open to offers for anything that may be of use! Link to post Share on other sites
Brian Eldred Posted July 23, 2023 Author Report Share Posted July 23, 2023 Some more parts: Radiator, Stanpart. Had a slight leak, so I swapped it for a spare I had. Worth re-coring? Part copper brake part set. Pipes D,E & F in the diagram plus a hose, don't know which one. Link to post Share on other sites
Brian Eldred Posted July 23, 2023 Author Report Share Posted July 23, 2023 Wiper motor cog and overrider gaskets now gone, and maybe rear lenses too. Link to post Share on other sites
Lebro Posted August 1, 2023 Report Share Posted August 1, 2023 Is the PVC still available ? not normally fitted to a '3, but I might try it ! Bob Link to post Share on other sites
Brian Eldred Posted August 1, 2023 Author Report Share Posted August 1, 2023 Hi Bob, yes it is! (assuming you mean PCV :-). Not sure why you would want to try it though? I swapped it for 2 vent pipes into a catch tank on my 4a. Brian Link to post Share on other sites
Lebro Posted August 1, 2023 Report Share Posted August 1, 2023 Yes, I did mean PCV ! Can you PM me with price & I will send address (unless you will be at Shepton ?) Bob Link to post Share on other sites
Lebro Posted August 4, 2023 Report Share Posted August 4, 2023 PM sent Bob Link to post Share on other sites
Lebro Posted August 9, 2023 Report Share Posted August 9, 2023 And now fitted. Link to post Share on other sites
stuart Posted August 9, 2023 Report Share Posted August 9, 2023 13 minutes ago, Lebro said: And now fitted. Is the rocker cover to PCV pipe a bit squashed there Bob? Stuart. Link to post Share on other sites
Lebro Posted August 9, 2023 Report Share Posted August 9, 2023 No, it just looks like it is 'cos of the big air pipe above it. Just been for a run, mixture seems richer than before, & tickover gone up to over 1000. have now re-set that, but will stick 4 X colourtunes on it to check mixture. Previous venting was direct into the carbs, those ports now blanked off. Link to post Share on other sites
stuart Posted August 9, 2023 Report Share Posted August 9, 2023 1 hour ago, Lebro said: No, it just looks like it is 'cos of the big air pipe above it. Just been for a run, mixture seems richer than before, & tickover gone up to over 1000. have now re-set that, but will stick 4 X colourtunes on it to check mixture. Previous venting was direct into the carbs, those ports now blanked off. You will find it alters tickover speed. A bust diaphragm inside on a 4a with one of them will run all over the place. Stuart. Link to post Share on other sites
Recommended Posts