nigelcurry Posted October 13, 2022 Report Share Posted October 13, 2022 Hi all i am about to stick on the rear wing decals (white TR6) and was wondering if anyone knows of an easy way of positioning them, As always any thoughts most welcome nige Quote Link to post Share on other sites
stuart Posted October 13, 2022 Report Share Posted October 13, 2022 Previous thread here came up in a search https://www.tr-register.co.uk/forums/index.php?/topic/32482-rear-wing-decals/&tab=comments#comment-239391 Stuart. Quote Link to post Share on other sites
john.r.davies Posted October 13, 2022 Report Share Posted October 13, 2022 Nigel, I presume these are the type held by an opalescent front sheet, and a non-sticky back sheet that protects the adhesive? Draw a line on the front sheet, above and parallel to the lettering. Put strips of masking tape on the wing panel, horizontal and vertical around the area where you want to place it. Now, and without removing the backing paper, place the decal on the panel and adjust until you are happy. Mark the edge of the front sheet and the adjoining masking tape, remove the backing and put the decal back in the marked place. Rub it down with a hard object, a tool handle for instance. Remove the front paper an masking tape. Voila! Good luck! John Quote Link to post Share on other sites
ntc Posted October 13, 2022 Report Share Posted October 13, 2022 It’s easy use soapy water position in the correct location then plastic card to disperse water Quote Link to post Share on other sites
nigelcurry Posted October 14, 2022 Author Report Share Posted October 14, 2022 Great info cheers lads nige Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.