Mike JOnes Posted August 21, 2021 Report Share Posted August 21, 2021 I am just putting the wiring loom into my car (TR250 but the loom is for a RHD TR5). Can anyone advise where the voltage stabiliser sits please Thanks Mike Quote Link to post Share on other sites
rcreweread Posted August 21, 2021 Report Share Posted August 21, 2021 Mike - I don't know about a 250 or 5, but in a 4A it is fitted in the RH footwell on the side panel just beneath the bulkhead - hopefully attached photos may help cheers Rich Quote Link to post Share on other sites
RogerH Posted August 21, 2021 Report Share Posted August 21, 2021 (edited) I think it is attached to the back of the speedo item 11 https://www.moss-europe.co.uk/shop-by-model/triumph/tr5-6/electrical-system/gauges-instruments/instruments-switches-tr5-tr250-tr6-to-c-cr1-cf1-1967-72.html Roger Edited August 21, 2021 by RogerH Quote Link to post Share on other sites
250 Posted August 21, 2021 Report Share Posted August 21, 2021 Rogers correct originally on back of speedo. Mark Quote Link to post Share on other sites
Mike JOnes Posted August 21, 2021 Author Report Share Posted August 21, 2021 That is very helpful thanks. For some reason I thought it was in the engine bay near the fuse box but my wires for it were not it the right place! Makes a lot more sense now! Cheers Mike Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.