dblenk Posted July 28, 2021 Report Share Posted July 28, 2021 (edited) Hi looking to make a frame to put the body on when i take it off the chassis anyone done it before got drgs dims for me to copy thanks david Edited July 28, 2021 by dblenk Quote Link to post Share on other sites
Tim T Posted July 28, 2021 Report Share Posted July 28, 2021 I could give you dimensions for this if you want. Tim Quote Link to post Share on other sites
ST TR5 Posted July 28, 2021 Report Share Posted July 28, 2021 Hi Dave You can call over and have a look at mine. I’ve two one to replace the chassis and one to flip the shell over and work on the underside. Cheers Sean Quote Link to post Share on other sites
dblenk Posted July 28, 2021 Author Report Share Posted July 28, 2021 Hi Tim someone mentioned a pallet with castors was wondering wether the wheel arches should be supported its a 69 car thanks dave Sean will pop over will text you cheers dave Quote Link to post Share on other sites
ntc Posted July 28, 2021 Report Share Posted July 28, 2021 David Your better of with four trestles and two wood supports Quote Link to post Share on other sites
Tim T Posted July 28, 2021 Report Share Posted July 28, 2021 Pallet would probably do the job although a little on the small side. No need to support the wheel arches if the sills are good and door openings are braced. My contraption located tight inside the sills and the angled central pieces ran along the inside of the floor pans. Tim Quote Link to post Share on other sites
dblenk Posted July 28, 2021 Author Report Share Posted July 28, 2021 37 minutes ago, ntc said: David Your better of with four trestles and two wood supports ok will look at that option also cheers dave Quote Link to post Share on other sites
dblenk Posted July 28, 2021 Author Report Share Posted July 28, 2021 17 minutes ago, Tim T said: Pallet would probably do the job although a little on the small side. No need to support the wheel arches if the sills are good and door openings are braced. My contraption located tight inside the sills and the angled central pieces ran along the inside of the floor pans. Tim Tim will check out Seans and the trestles before i get you measuring everything thanks david Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.