AarhusTr6 Posted May 23, 2021 Report Share Posted May 23, 2021 Hi everybody I got a new gasket set for my top end rebuild and there are two gaskets at the top right of a picture which I am a bit unsure what they are for. Also the bottom three looks similar but one is slightly different..? Appreciate help Richard Quote Link to post Share on other sites
Graham Posted May 23, 2021 Report Share Posted May 23, 2021 Richard you should check this on the Moss spares site or similar, but I think the gasket at the very top of your picture is the water pump manifold to block gasket and the one below is the thermostat housing gasket, the gaskets at the very bottom look a bit like distributor shim gaskets or possibly if your car is on Strombergs they could be carb gaskets, but like I said have a look at the Moss site sure that will put you straight Quote Link to post Share on other sites
DIYBOSSCAT Posted May 23, 2021 Report Share Posted May 23, 2021 Hi Richard, Moss - https://www.moss-europe.co.uk/catalogsearch/result/?search_group=8981&q=gaskets Vince. Quote Link to post Share on other sites
Drewmotty Posted May 23, 2021 Report Share Posted May 23, 2021 the bottom three are the two thermostat housing gaskets and the thin one is for the distributor pedestal. Quote Link to post Share on other sites
Mark69 Posted May 23, 2021 Report Share Posted May 23, 2021 Yes the top two right are water pump and water pump/ thermostat housing , large silver one with two large holes is the exhaust to manifold gasket. Quote Link to post Share on other sites
AarhusTr6 Posted May 24, 2021 Author Report Share Posted May 24, 2021 I truly love this site, thanks so much for help. I am in a "out of comfort zone" and doing my first every top end re-build, so I really appreciate help Richard Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.