John h Posted May 2, 2020 Report Share Posted May 2, 2020 (edited) Hi to all hope everybody is well Just finished scraping the undershild off the inside of the wings as you can see from the photo some rust some areas still in primer . should I treat it with a rust converter then primer if so which products is best I saw a post the other day and Stuart commented on using bonda rust does that go on to the rusted areas first .Also I’ve seen a couple of shells (under side) and inside wing areas coated in a black stuff that looks like under shield is there a modern equivalent? If so what do you use? Kind regards John Edited August 31, 2020 by John h Remove Quote Link to post Share on other sites
stuart Posted May 2, 2020 Report Share Posted May 2, 2020 For that I would use some Jenolite or Bild Hamber De-Ox to get the metal clean then apply Bondarust and then stone chip then prime then body colour then fit, waxoyl and forget. Stuart. Quote Link to post Share on other sites
John h Posted May 2, 2020 Author Report Share Posted May 2, 2020 Thanks Stuart this is better than having you on speed dial many thanks for your quick response regards john Quote Link to post Share on other sites
glasgow4a Posted May 3, 2020 Report Share Posted May 3, 2020 Buy a gallon of Milkstone Remover from your local farm supplier. This stuff is the equivalent of Jenolite at a fraction of the cost., cheers Ian. Quote Link to post Share on other sites
Andy Moltu Posted May 7, 2020 Report Share Posted May 7, 2020 Phosphric acid I believe. Quote Link to post Share on other sites
John h Posted May 7, 2020 Author Report Share Posted May 7, 2020 Hi all had a shop around and found wilko was half the price of eBay £10 for 500ml only bought one should have got a few more at that price anyway not sure if wilko is a national store ? But is popular down south coast. Have used phosphoric acid before soaking some of the running gear and worked really well.didnt give it a thought to use it on the body.kind regards John Quote Link to post Share on other sites
stuart Posted May 7, 2020 Report Share Posted May 7, 2020 1 hour ago, John h said: Hi all had a shop around and found wilko was half the price of eBay £10 for 500ml only bought one should have got a few more at that price anyway not sure if wilko is a national store ? But is popular down south coast. Have used phosphoric acid before soaking some of the running gear and worked really well.didnt give it a thought to use it on the body.kind regards John Make sure you get rid of all of it before painting. Stuart. Quote Link to post Share on other sites
John h Posted May 7, 2020 Author Report Share Posted May 7, 2020 I’m going stick with the jenolite and bondarust Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.